by Benard Wanjiru, Patrick van Bommel and Djoerd Hiemstra
Journal of Engineering Research and Sciences, Volume 3, Issue 8, Page # 1-14, 2024; DOI: 10.55708/js0308001
Abstract: Automated grading systems can help save a lot of time when evaluating students’ assignments. In this paper we present our ongoing work for a model for generating correctness levels. We utilize this model to demonstrate how we can grade students SQL queries employing partial grading in order to allocate points to parts of the queries… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Artificial Intelligence – Computer Science (AIC))

by Prashobh Karunakaran, Mohammad Shahril Osman and Badrul Hisham Hossain
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 10-17, 2024; DOI: 10.55708/js0306002
Abstract: Using electricity to heat up water was among the first uses of electricity by Thomas Edison and the electric kettle has become ubiquitous. But the possible electrocution of humans is low in the above but not so in the bathing water heater where the heating element through which up to 3.6 kW of electricity flows… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Shudeb Babu Sen Omit, Md Mohiuddin, Salma Akhter, Md. Hasan Imam, A. K. M. Mostofa Kamal Habib, Syed Mohammad Meraz Hossain and Nitun Kumar Podder
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 32-41, 2024; DOI: 10.55708/js0304004
Abstract: Comorbidity is the co-existence of one or more diseases that occur concurrently or after the primary disease. Patients may have developed comorbidities for COVID-19 that cause harm to the patient’s organs. Besides, patients with existing comorbidities are at high risk, since mortality rates are strongly influenced by comorbidities or former health conditions. Therefore, we developed… Read More

(This article belongs to the Section Mathematical and Computational Biology (MCB))

by Yasushi Itoh, Takana Kaho and Koji Matsunaga
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 14-21, 2023; DOI: 10.55708/js0204002
Abstract: An advanced load-line analysis software is devised for nonlinear circuit design and simulation of microwave low-distortion, high-efficiency and high-power GaN HEMT amplifiers. A single software package can incorporate DC, small- and large-signal performances of GaN HEMT devices, and then analyze nonlinear performance of amplitude-to-amplitude (AM-AM) and amplitude-to-phase (AM-PM) modulations, and finally evaluate intermodulation distortion (IMD)… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Misha Khan, Mufliha Ibrahim, Muhammad Saad Shabbir, Muhammad Huzaifa Tofique, Muhammad Naheel Khalili, Muhammad Asad, Muhammad Ahmed, Muhammad Haroon and Saima Zainab
Journal of Engineering Research and Sciences, Volume 2, Issue 2, Page # 1-7, 2023; DOI: 10.55708/js0202001
Abstract: Pandemics always have a significant effect on the physical, mental, and financial status of people in general. With new variants of coronavirus emerging now and then, it is difficult to process the sudden changes and new healthcare implementations for all individuals. In this situation, our objective was to assess the mental-wellbeing of medical students and… Read More

(This article belongs to the Section Psychology (PYL))

by Amol M Khatkhate, Varad Raut, Madhura Jadhav, Shreya Alva, Kalpesh Vichare and Ameya Nadkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 36-44, 2022; DOI: 10.55708/js0106005
Abstract: The research in this paper focuses on the capture of respiratory patterns in real-time through a minor modification of an anti-snoring device that is readily available off the shelf or can be bought online and attaching a microphone to it. The audio pattern is recorded for the various lung conditions at different stages. The data… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Biochemical Research Methods (BRM))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Construction and Building Technology (CBT))

by Radoslav Hrischev
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 22-27, 2022; DOI: 10.55708/js0104003
Abstract: This article is a result of the need to quickly and efficiently organize distance learning for students during the pandemic caused by COVID-19. Some e-learning opportunities provided by internet technologies, web-based platforms, online engineering tools are presented. Examples of training students in business information systems based on learning platforms and demo systems are presented, as… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Abdulhalim Musa Abubakar, Bello Iliyasu and Zakiyyu Muhammad Sarkinbaka
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 133-147, 2022; DOI: 10.55708/js0103014
Abstract: It is pertinent to highlight areas POLYMATH software is useful for chemical engineering analysis. Its applications had been demonstrated in this paper using 10 Problem Set, in areas that includes transport phenomena, heat transfer, reaction, and bioreaction kinetics to solve differential equations, nonlinear equations, simultaneous linear equations, graphical representation and regression problems arising in these… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Faith Onechojo Yusufu, Bosede Olanike Awoyemi and Kehinde Akomolafe
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 39-51, 2022; DOI: 10.55708/js0103005
Abstract: The purpose of this work was to investigate the effects of total health spending on the growth of the economy in Southern and Western Sub-Saharan Africa. The mean group, dynamic fixed effect, and pooled mean group/ARDL (Autoregressive Distributed Lags) panel data analyses were used to scrutinize the short and long-term effects of total per capita… Read More

(This article belongs to the Section Economics (ECN))

by Hager Hussein
Journal of Engineering Research and Sciences, Volume 4, Issue 8, Page # 24-30, 2025; DOI: 10.55708/js0408003
Abstract: Software engineering plays an important role in computer science. Novel quantum algorithms can efficiently solve software-engineering problems. Not only software engineering but also many industries including logistics, finance, genomics, resource allocation, logistics, bioinformatics, mobile agents and more have optimization problems. Such problems may have long time solutions. Research has been conducted to improve the performance… Read More

(This article belongs to the Section Quantum Science and Technology (QST))

by Natércia Lima, Clara Viegas, Alexandra R. Costa, Claudia Orozco-Rodríguez, Gustavo R. Alves and André Vaz Fidalgo
Journal of Engineering Research and Sciences, Volume 4, Issue 7, Page # 15-25, 2025; DOI: 10.55708/js0407002
Abstract: Even though the use of technology in Education grew during the COVID Pandemic and some habits even contributed positively regarding the planet sustainability, after five years what can be said about students’ perception about it? This work is a follow-up to a previous study made shortly after academic life resumed its normality. A student questionnaire… Read More

(This article belongs to the Special Issue on SP7 (Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2025)) and the Section Education and Educational Research (EER))

by Ranyah Taha, Fuad Musleh and Abdel Rahman Musleh
Journal of Engineering Research and Sciences, Volume 4, Issue 6, Page # 1-8, 2025; DOI: 10.55708/js0406001
Abstract: Wildfires are a growing global concern, causing widespread environmental, economic, and health impacts. In the USA, fire incidents have become more frequent and intense due to factors such as climate change, prolonged droughts, and human activities. Machine learning plays a vital role in predicting and classifying fires by analyzing vast satellite and environmental datasets with… Read More

(This article belongs to the Special Issue on SP6 (Special Issue on Computing, Engineering and Sciences (SI-CES 2024-25)) and the Section Remote Sensing (RMS))

by Rahul Kotana
Journal of Engineering Research and Sciences, Volume 4, Issue 4, Page # 1-7, 2025; DOI: 10.55708/js0404001
Abstract: This study evaluates the feasibility, efficiency, and cost-effectiveness of a Hybrid Energy Storage System (HESS) for a 30KW Microgrid. The research analyses various storage configurations incorporating batteries and supercapacitors, considering factors such as cost, reliability, and performance. While conventional Battery Energy Storage Systems (BESS) offer lower initial costs, they suffer from long-term reliability issues due… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Eunbi Lee, Ashton Minjae Kim and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 4, Issue 3, Page # 1-7, 2025; DOI: 10.55708/js0403001
Abstract: This paper deals with the primary factors and countermeasures to prevent falls in seniors in an aging society. Falls among seniors are emerging as a serious social and economic problem, leading to psychological trauma, physical injuries, long-term disabilities, fatalities, and increased medical costs. Therefore, fall prevention is essential for improving an individual’s quality of life… Read More

(This article belongs to the Section Social Sciences (SCS))

by Laurence Banda
Journal of Engineering Research and Sciences, Volume 4, Issue 2, Page # 1-10, 2025; DOI: 10.55708/js0402001
Abstract: The fierce race among mobile network operators (MNOs) to roll out fifth-generation (5G) networks has intensified. One of the potential markets where 5G deployment has increased tremendously is Sub-Saharan Africa. This is primarily due to rapid economic growth and the new opportunities that 5G networks and the associated technologies are expected to offer through sustainable… Read More

(This article belongs to the Section Operations Research and Management Science (ORM))

by Tefo Gordon Sekgweleo and Phathutshedzo Makovhololo
Journal of Engineering Research and Sciences, Volume 3, Issue 12, Page # 1-13, 2024; DOI: 10.55708/js0312001
Abstract: Developing software is a huge job, which is why digital product teams rely on the software development life cycle (SDLC). SDLC is a critical framework for digital product teams, and software testing is its most vital component. Testing evaluates software components to identify properties of interest, detect defects, and ensure alignment with requirements. If not… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Eslam Deef-Allah, Korrenn Broaddus and Magdy Abdelrahman
Journal of Engineering Research and Sciences, Volume 3, Issue 11, Page # 41-59, 2024; DOI: 10.55708/js0311004
Abstract: For safe driving, the proper level of pavement friction must be maintained. The capacity of a pavement surface to offer friction to vehicles during cornering maneuvers or crucial braking is improved by high friction surface treatment. Calcined Bauxite is the most often utilized high friction aggregate. Calcined Bauxite, a byproduct, was the priciest aggregate relative… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Giacomo Bucci and Imad Zaza
Journal of Engineering Research and Sciences, Volume 3, Issue 11, Page # 1-23, 2024; DOI: 10.55708/js0311001
Abstract: This paper is an extended version of that presented at the conference Histelcon 2021 (IEEE). It provides a deeper illustration of the elements of the exhibit under development at the Faculty of Engineering at the University of Florence (Italy). The paper presented at Histelcon 2021 focussed on the birth of microprocessors, on the 8086, on… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Yuexin Liu, Amir Tofighi Zavareh and Ben Zoghi
Journal of Engineering Research and Sciences, Volume 3, Issue 10, Page # 69-75, 2024; DOI: 10.55708/js0310007
Abstract: Mental health concerns are increasingly prevalent among university students, particularly in engineering programs where academic demands are high. This study builds upon previous work aimed at improving mental health support for engineering students through the use of machine learning (ML) and eye-tracking technology. A framework was developed to monitor mental health by analyzing eye movements… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Artificial Intelligence – Computer Science (AIC))

by Laurence Banda
Journal of Engineering Research and Sciences, Volume 3, Issue 10, Page # 13-20, 2024; DOI: 10.55708/js0310002
Abstract: The fusion of fifth generation (5G) networks, Internet of Things (IoT) and artificial intelligence (AI), referred to as intelligent connectivity by most industry experts, can be seen as a crucial success factor for sustainable digitalization. Until recently, research into these key triad technologies has been conducted in isolation. One of the promising applications of intelligent… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Telecommunications (TEL))

by Tinghao Feng, Sophie Columbia, Christopher Campell and Rahman Tashakkori
Journal of Engineering Research and Sciences, Volume 3, Issue 9, Page # 61-74, 2024; DOI: 10.55708/js0309004
Abstract: Honey bee health is crucial for global ecosystems, but traditional data analysis methods often struggle to capture the complex interplay between bee behavior and environmental factors. To bridge this gap, we developed HivePool, a novel data visualization and analysis tool designed to empower beekeepers and researchers with deeper insights into these interactions. This paper explores… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Horticulture (HOR))

by Diptadip Maiti, Madhuchhanda Basak and Debashis Das
Journal of Engineering Research and Sciences, Volume 3, Issue 9, Page # 26-60, 2024; DOI: 10.55708/js0309003
Abstract: As documented in recent research, this review offers a thorough examination of the intricate subject of fingerprint authentication, including a wide range of issues and applications. Addressing problems like non-linear deformations and enhancing picture quality, which are frequently reduced by sophisticated improvement and alignment techniques are important components of fingerprint image authentication. Countering security concerns… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Cybernetics – Computer Science (CYC))

by Nikolaos V. Oikonomou and Dimitrios V . Oikonomou
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 18-32, 2024; DOI: 10.55708/js0306003
Abstract: This work explores the role of simulation in computer networks, discussing various network types, communication protocols, and the utilization of network simulators, with a focus on educational settings. We specifically analyze and compare five prominent network simulators: Cisco Packet Tracer, Riverbed Modeler Academic Edition, GNS3, NS-3, and Mininet. These tools are examined in terms of… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Software Engineering – Computer Science (SEC))