Results (106)
Search Parameters:
Keyword: PLAUsing Artificial Intelligence Models to Predict the Wind Power to be fed into the Grid
by Sambalaye Diop, Papa Silly Traore, Mamadou Lamine Ndiaye and Issa Zerbo
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 1-9, 2024; DOI: 10.55708/js0306001
Abstract: The Taïba Ndiaye wind farm, connected to the SENELEC grid, plays a key role in offsetting shortfalls in electricity consumption, with an installed capacity of 158.7 MW. Moreover, as an intermittent power station, its production is highly dependent on the environmental conditions in the region. Bad weather can disrupt the electricity network, requiring forecasting methods… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Electrical Engineering (ELE))
Microwave and Microcontroller Technology to Achieve Warm Water Bathing
by Prashobh Karunakaran, Mohammad Shahril Osman and Badrul Hisham Hossain
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 10-17, 2024; DOI: 10.55708/js0306002
Abstract: Using electricity to heat up water was among the first uses of electricity by Thomas Edison and the electric kettle has become ubiquitous. But the possible electrocution of humans is low in the above but not so in the bathing water heater where the heating element through which up to 3.6 kW of electricity flows… Read More
(This article belongs to the Section Electrical Engineering (ELE))
Computational and Bioinformatics Approaches for Identifying Comorbidities of COVID-19 Using Transcriptomic Data
by Shudeb Babu Sen Omit, Md Mohiuddin, Salma Akhter, Md. Hasan Imam, A. K. M. Mostofa Kamal Habib, Syed Mohammad Meraz Hossain and Nitun Kumar Podder
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 32-41, 2024; DOI: 10.55708/js0304004
Abstract: Comorbidity is the co-existence of one or more diseases that occur concurrently or after the primary disease. Patients may have developed comorbidities for COVID-19 that cause harm to the patient’s organs. Besides, patients with existing comorbidities are at high risk, since mortality rates are strongly influenced by comorbidities or former health conditions. Therefore, we developed… Read More
(This article belongs to the Section Mathematical and Computational Biology (MCB))
Numerical Analysis of Riverbank Slope Stability Considering Rainfall, Vegetation and Water Level Fluctuation
by Md Tanvir Ahsan, Ji-Peng Wang, Saidov Mirzo Sibgatullovich, Abdelali Dadda and Salikhov Farid Salokhiddinovich
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 20-31, 2024; DOI: 10.55708/js0304003
Abstract: The occurrence of landslides and slope instability along riparian zones has been a recurrent phenomenon of substantial concern globally. This paper presents a comprehensive investigation of riverbank slope stability utilizing soils from the Yellow River in China, with a particular emphasis on the effects of water level fluctuations, precipitation, and vegetation. The research examines the… Read More
(This article belongs to the Section Civil Engineering (CVE))
Estimation of Elbow Joint Movement Using ANN-Based Softmax Classifier
by Abdullah Y. Al-Maliki, Kamran Iqbal and Gannon White
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 1-9, 2024; DOI: 10.55708/js0304001
Abstract: Estimating the natural voluntary movement of human joints in its entirety is a challenging problem especially when high accuracy is desired. In this paper, we build a modular estimator to estimate the elbow joint motion including angular displacement and direction. Being modular, this estimator can be scaled for application to other joints. We collected surface… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Health Care Sciences and Services (HCS))
"Greenwashing" or "Helping": ESG Performance and Chinese Firm Total Factor Productivity
by Jing Zhang and Ziyang Liu
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 1-12, 2024; DOI: 10.55708/js0303001
Abstract: As the market economy has continued to develop, businesses have consistently prioritized profits, excessively emphasizing income and financial gains while neglecting ecological conservation and financial fraud. Consequently, the phenomenon of "greenwashing" has emerged. How to prevent this "greenwashing" phenomenon while pursuing economic benefits and enabling high-quality business development has become a focal point. Therefore, this… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Business and Finance (BUF))
BIM and Sustainable Design: A Review of Strategies and Tools for Green Building Practices
by Muhammad Numan, Usama Saadat and Muhammad Usman Farooq
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 1-7, 2024; DOI: 10.55708/js0302001
Abstract: Building Information Modeling (BIM) provides a robust foundation for driving sustainability across architecture, engineering and construction (AEC) practices. This paper presents a systematic review of literature elucidating the confluence of BIM tools and processes with accelerated performance simulations and green building certification systems needed to guide environmentally sensitive design. Integrated Revit-Insight 360 is shown to… Read More
(This article belongs to the Section Civil Engineering (CVE))
BIM and Risk Management: A Review of Strategies for Identifying, Analysing and Mitigating Project Risks
by Muhammad Numan
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 20-26, 2024; DOI: 10.55708/js0301004
Abstract: Construction projects involve numerous risks that can impact cost, schedule, quality, safety, and sustainability. Effective risk management is critical for project success. Building Information Modelling (BIM) offers capabilities that can transform risk management across the project lifecycle. This paper provides a systematic review of how BIM can aid core risk management processes including identification, analysis,… Read More
(This article belongs to the Section Civil Engineering (CVE))
Four Rivers and a Reservoir – the Last Homes of the Wild Australian Lungfish
by Anne Kemp
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 11-19, 2024; DOI: 10.55708/js0301003
Abstract: The environment of the Australian lungfish, Neoceratodus forsteri, in south east Queensland, has changed fundamentally since white settlement, and this threatens the survival of the species. Some of the damage to lungfish habitats is the result of human determination to use water for the various needs of industry and people. Additional problems include droughts and… Read More
(This article belongs to the Section Agricultural Engineering (AGE))
Application of deuterium Oxide (D<sub>2</sub>O) Isotope Tracing Technique for Land Grid Array Package Failure Analysis
by Liao Jinzhi Lois, Liu Qing, Quan Jing, Ye Qing, Zhang Xi, Hua Younan and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 1-5, 2024; DOI: 10.55708/js0301001
Abstract: A land grid array (LGA) is an integrated circuit design with a grid of contacts connected to other components of a printed circuit board. LGA is used for various high-speed and high-frequency applications due to its small terminal parasitic inductance. However, LGA packages are non-hermetic, as most the components of the LGA, like epoxy molding… Read More
(This article belongs to the Section Electronic Engineering (EEE))
Neural Synchrony-Based State Representation in Liquid State Machines, an Exploratory Study
by Nicolas Pajot and Mounir Boukadoum
Journal of Engineering Research and Sciences, Volume 2, Issue 11, Page # 1-14, 2023; DOI: 10.55708/js0211001
Abstract: Solving classification problems by Liquid State Machines (LSM) usually ignores the influence of the liquid state representation on performance, leaving the role to the reader circuit. In most studies, the decoding of the internally generated neural states is performed on spike rate-based vector representations. This approach occults the interspike timing, a central aspect of biological… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Neurosciences (NES))
Device Authentication using Homomorphic Encryption
by Supriya Yadav and Gareth Howells
Journal of Engineering Research and Sciences, Volume 2, Issue 10, Page # 1-8, 2023; DOI: 10.55708/js0210001
Abstract: In the digital era, data security in files, databases, accounts, and networks is of utmost importance. Due to the sensitive, private, or protected information they contain, databases are a common target for cyber attacks. To assess threats to data and lower the risk involved with data processing and storage, data security is crucial. Therefore, it… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Software Engineering – Computer Science (SEC))
NNR Artificial Intelligence Model in Azure for Bearing Prediction and Analysis
by Henry Ogbemudia Omoregbee, Mabel Usunobun Olanipekun and Bright Aghogho Edward
Journal of Engineering Research and Sciences, Volume 2, Issue 6, Page # 1-9, 2023; DOI: 10.55708/js0206001
Abstract: Neural Network regression (NNR) is considered more effective as compared to multiple neural networks model readily available in Azure to evaluate the Remaining Useful Life (RUL) of bearing in this work because it performs better than other models when used and was demonstrated as a non-programing technique for analyzing enormous data without the use of… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Artificial Intelligence – Computer Science (AIC))
Classification of Rethinking Hyperspectral Images using 2D and 3D CNN with Channel and Spatial Attention: A Review
by Muhammad Ahsan Aslam, Muhammad Tariq Ali, Sunwan Nawaz, Saima Shahzadi and Muhammad Ali Fazal
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 22-32, 2023; DOI: 10.55708/js0204003
Abstract: It has been demonstrated that 3D Convolutional Neural Networks (CNN) are an effective technique for classifying hyperspectral images (HSI). Conventional 3D CNNs produce too many parameters to extract the spectral-spatial properties of HSIs. A channel service module and a spatial service module are utilized to optimize characteristic maps and enhance sorting performance in order to… Read More
(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))
Designing Critical and Secondary Information in Augmented Reality Headsets for Situational Awareness
by Julia Woodward, Jesse Smith, Isaac Wang, Sofia Cuenca and Jaime Ruiz
Journal of Engineering Research and Sciences, Volume 2, Issue 3, Page # 1-15, 2023; DOI: 10.55708/js0203001
Abstract: Augmented Reality (AR) headsets are being used in different contexts (e.g., the oil industry, healthcare, military); however, there is a lack of research and design recommendations on how information should be presented in the AR headset displays, especially for aiding users’ situational awareness. We present two studies: one examining if existing findings on the perceptibility… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Artificial Intelligence – Computer Science (AIC))
A Tunable Dual-mode SIW Cavity Based Bandpass Filter with Wide Upper Stopband Characteristics
by Md. Atiqur Rahman and Pankaj Sarkar
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 24-29, 2023; DOI: 10.55708/js0201003
Abstract: A new approach to design a bandpass filter using substrate integrated waveguide (SIW) topology is presented here for 5G applications. The aim of the design is to produce a dual mode passband characteristic with wide upper stopband behaviour, centred at 4.7 GHz. Four identical Stepped Impedance Resonator (SIR) slots are etched into the top surface… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Electronic Engineering (EEE))
CAPEF: Context-Aware Policy Enforcement Framework for Android Applications
by Saad Inshi, Mahdi Elarbi, Rasel Chowdhury, Hakima Ould-Slimane and Chamseddine Talhi
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 13-23, 2023; DOI: 10.55708/js0201002
Abstract: The notion of Context-Awareness of mobile applications is drawing more attention, where many applications need to adapt to physical environments of users and devices, such as location, time, connectivity, resources, etc. While these adaptive features can facilitate better communication and help users to access their information anywhere at any time, this however bring risks caused… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Electrical Engineering (ELE))
Modelling, Simulation and Sensitivity Analysis of Generator Control Systems using Coexisting and Cooperative Tools
by Javier Urquizo, Diover Bonilla, Francisco Rivera and Rommel Chang
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 1-12, 2023; DOI: 10.55708/js0201001
Abstract: This research is about tuning the automatic generator control (AGC) unit within the National Transmission System (NTG) and is intended to provide a set of key insights into problems related to generator control systems oscillations and the possible available solutions. The case study is the Baba Hydroelectric Power Plant in Ecuador. The aim is to… Read More
(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Electrical Engineering (ELE))
Stakeholder’s Perception of Critical Success Factors for Design-Bid-Build Highway Projects in Nigeria
by Fabi Jonathan Kehinde and Akinseinde Olubola Atanda
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 28-37, 2022; DOI: 10.55708/js0112005
Abstract: Project success factors are germane in achieving project objectives by stakeholders. The research investigates the stakeholder’s perception of project success factors for highway project in Nigeria. Therefore, the specific objectives is to identify and assess factor influencing the success of highway project in Nigeria. To achieve the main objective of this paper, two hundred (200)… Read More
(This article belongs to the Section Construction and Building Technology (CBT))
The Current Trends of Deep Learning in Autonomous Vehicles: A Review
by Raymond Ning Huang, Jing Ren and Hossam A. Gabbar
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 56-68, 2022; DOI: 10.55708/js0110008
Abstract: Autonomous vehicles are the future of road traffic. In addition to improving safety and efficiency from reduced errors compared to conventional vehicles, autonomous vehicles can also be implemented in applications that may be inconvenient or dangerous to a human driver. To realize this vision, seven essential technologies need to be evolved and refined including path… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))
Fractal Research to the Production of High-strength Materials
by Seoryeong Choi and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 36-44, 2022; DOI: 10.55708/js0110006
Abstract: SiC ceramics are excellent materials applied at high temperatures because of their lightweight, excellent high-temperature strength, and high thermal shock resistance. For better engineering properties, we made SiC with fractal lattices. Stress-strain behavior and modulus changes from room temperature to 1,250 oC were analyzed using LAMMPS S/W, a molecular dynamics program. As a result of… Read More
(This article belongs to the Section Applied Physics (APY))
Images Compression using Combined Scheme of Transform Coding
by Zainab Jawad Ahmed, Loay Edwar George and Raad Ahmed Hadi
Journal of Engineering Research and Sciences, Volume 1, Issue 9, Page # 8-14, 2022; DOI: 10.55708/js0109002
Abstract: Some problems want to be solved in image compression to make the process workable and more efficient. Much work had been done in the field of lossy image compression based on wavelet and Discrete Cosine Transform (DCT). In this paper, an efficient image compression scheme is proposed, based on a common encoding transform scheme; It… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))
Hexagonal CSRR Based Broadband Monopole Antenna at UHF-Band
by Suleyman Meliksah Yayan and Ali Furkan Aslan
Journal of Engineering Research and Sciences, Volume 1, Issue 9, Page # 1-7, 2022; DOI: 10.55708/js0109001
Abstract: In this work, complementary split ring resonators (CSRR) based broadband monopole antenna is proposed. A variety of geometrical shapes are studied as a radiator to find out the radiator with the highest possible return loss bandwidth potential. It has been found that the semi-circularly shaped resonator has the widest VSWR<3 bandwidth. Therefore, a monopole antenna… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electronic Engineering (EEE))
Research on Feature Extraction Method of Fiber Bragg Grating Vibration Monitoring Based on FFT
by Mengxing Zhang, Youming Hua, Chunbin Chen, Chenkun Chu and Xiuli Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 44-47, 2022; DOI: 10.55708/js0107007
Abstract: Optical fiber is used in various fields because of its advantages of large-capacity communication, long-distance transmission, low signal crosstalk, good confidentiality, anti-electromagnetic interference, good transmission quality, small size, light weight, and long life. In this paper, the latest research progress of optical fiber sensing technology and its application and development in the field of rotating… Read More
(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Instruments and Instrumentation (INN))
Advanced Medical Telemonitoring for the Suspected Cases of Covid-19 Virus
by Mohamed Touil, Lhoussain Bahatti and Abdelmounime El Magri
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 38-43, 2022; DOI: 10.55708/js0107006
Abstract: Nowadays Corona Virus is threatening everyone, everywhere because it extremely dangerous. For many reasons; the first one it is a contagious virus, the second reason is there is no definite vaccination for that, because even some vaccinated people against Covid were affected. in the same regard this paper will present a telemedicine solution against Covid-19.… Read More
(This article belongs to the Section Health Care Sciences and Services (HCS))