by Reham Almutairi, Giacomo Berg and Graham Morgan
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 33-40, 2024; DOI: 10.55708/js0306004
Abstract: The increasing popularity and attention in Vehicular Ad-hoc Networks (VANETs) have prompted researchers to develop accurate and realistic simulation tools. Realistic simulation for VANETs is challenging due to the high mobility of vehicles and the need to integrate various communication modalities such as Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) interactions. Existing simulators lack the capability to… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2024 and the Section Transportation Science & Technology (TST))

by Nikolaos V. Oikonomou and Dimitrios V . Oikonomou
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 18-32, 2024; DOI: 10.55708/js0306003
Abstract: This work explores the role of simulation in computer networks, discussing various network types, communication protocols, and the utilization of network simulators, with a focus on educational settings. We specifically analyze and compare five prominent network simulators: Cisco Packet Tracer, Riverbed Modeler Academic Edition, GNS3, NS-3, and Mininet. These tools are examined in terms of… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Software Engineering – Computer Science (SEC))

by Sambalaye Diop, Papa Silly Traore, Mamadou Lamine Ndiaye and Issa Zerbo
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 1-9, 2024; DOI: 10.55708/js0306001
Abstract: The Taïba Ndiaye wind farm, connected to the SENELEC grid, plays a key role in offsetting shortfalls in electricity consumption, with an installed capacity of 158.7 MW. Moreover, as an intermittent power station, its production is highly dependent on the environmental conditions in the region. Bad weather can disrupt the electricity network, requiring forecasting methods… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Electrical Engineering (ELE))

by Prashobh Karunakaran, Mohammad Shahril Osman and Badrul Hisham Hossain
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 10-17, 2024; DOI: 10.55708/js0306002
Abstract: Using electricity to heat up water was among the first uses of electricity by Thomas Edison and the electric kettle has become ubiquitous. But the possible electrocution of humans is low in the above but not so in the bathing water heater where the heating element through which up to 3.6 kW of electricity flows… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Ramsha Khalid and Muhammad Naqi Raza
Journal of Engineering Research and Sciences, Volume 3, Issue 5, Page # 23-36, 2024; DOI: 10.55708/js0305003
Abstract: The imminent 5G and 6G communication systems are projected to exhibit substantial advancements in comparison to the current 4G communication system. Several critical and prevalent concerns pertaining to the service quality of 5G and 6G communication systems encompass elevated capacity, extensive connectivity, minimal latency, robust security measures, energy efficiency, superior quality of user experience, and… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Telecommunications (TEL))

by Ilkhom Mukhtorov, Takhir Abduraxmonov and Abdusobir Saidov
Journal of Engineering Research and Sciences, Volume 3, Issue 5, Page # 1-13, 2024; DOI: 10.55708/js0305001
Abstract: The article considers the issue of modeling the multi-step process of customs clearance of goods in foreign trade. A mathematical model of control of the process under consideration has been developed. A brief review of existing methods for solving the linear programming problem with variable coefficients of the target function is given. The essence of… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Information Systems – Computer Science (ISC))

by Shudeb Babu Sen Omit, Md Mohiuddin, Salma Akhter, Md. Hasan Imam, A. K. M. Mostofa Kamal Habib, Syed Mohammad Meraz Hossain and Nitun Kumar Podder
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 32-41, 2024; DOI: 10.55708/js0304004
Abstract: Comorbidity is the co-existence of one or more diseases that occur concurrently or after the primary disease. Patients may have developed comorbidities for COVID-19 that cause harm to the patient’s organs. Besides, patients with existing comorbidities are at high risk, since mortality rates are strongly influenced by comorbidities or former health conditions. Therefore, we developed… Read More

(This article belongs to the Section Mathematical and Computational Biology (MCB))

by Md Tanvir Ahsan, Ji-Peng Wang, Saidov Mirzo Sibgatullovich, Abdelali Dadda and Salikhov Farid Salokhiddinovich
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 20-31, 2024; DOI: 10.55708/js0304003
Abstract: The occurrence of landslides and slope instability along riparian zones has been a recurrent phenomenon of substantial concern globally. This paper presents a comprehensive investigation of riverbank slope stability utilizing soils from the Yellow River in China, with a particular emphasis on the effects of water level fluctuations, precipitation, and vegetation. The research examines the… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Philip Slobodsky and Mariana Durcheva
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 10-19, 2024; DOI: 10.55708/js0304002
Abstract: The method of assessment affects on learning by determining how students manage their time and prioritize subjects. It is widely accepted that students may demonstrate different skills in different assessment formats. The authors demonstrated how e-assessment through the Halomda educational platform can not only improve student learning outcomes, but also enrich their learning experiences. In… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Education and Educational Research (EER))

by Mirza Hodžić and Naser Prljača
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 19-26, 2024; DOI: 10.55708/js0303003
Abstract: Variants of proportional navigation (PN) are perhaps mostly used guidance laws for tactical homing missiles. PN aims to generate commanding missile lateral acceleration proportional to line of sight (LOS) angular rate, so that missile velocity vector rotates in such a way to assure interception of a target. In order to generate commanding lateral accelerations, the… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Aerospace Engineering (ARO))

by Amin Barnawi and Mohammed Zohday
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 13-18, 2024; DOI: 10.55708/js0303002
Abstract: This paper discusses FPGA technology and assesses how this technology can be implemented to eliminate voltage spikes. This study also evaluates how FPGA can be used to remove the static voltage errors from the DC/DC boost converter. This technology is used to remove the voltage spikes when the impedance load is changed instantly. The FPGA… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Anne Kemp
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 15-21, 2024; DOI: 10.55708/js0302003
Abstract: The Australian lungfish, Neoceratodus forsteri, has several muscles associated with feeding. The massive adductor mandibularis muscle of N. forsteri, which closes the jaws, originates on the chondrocranium and inserts on the posterior aspect of Meckel’s cartilage in the mandible. The depressor mandibulae muscle, which opens the jaws, inserts on the medial articulation of the prearticular… Read More

(This article belongs to the Section Agriculture Dairy and Animal Science (ADA))

by Hua Younan, Liao Jinzhi Lois, Zhu Lei, Liu Binghai and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 8-14, 2024; DOI: 10.55708/js0302002
Abstract: For the semiconductor manufacturing processes, metal corrosion by halogen elements (e.g. fluorine, chlorine, and bromine) is always a critical issue. For the aluminum back-end-of-processes, these halogen elements tend to form aluminum halide defects on the surface of aluminum pads or aluminum metal wires, which can directly lead to the failure and reliability issues of the… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Muhammad Numan, Usama Saadat and Muhammad Usman Farooq
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 1-7, 2024; DOI: 10.55708/js0302001
Abstract: Building Information Modeling (BIM) provides a robust foundation for driving sustainability across architecture, engineering and construction (AEC) practices. This paper presents a systematic review of literature elucidating the confluence of BIM tools and processes with accelerated performance simulations and green building certification systems needed to guide environmentally sensitive design. Integrated Revit-Insight 360 is shown to… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Muhammad Numan
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 20-26, 2024; DOI: 10.55708/js0301004
Abstract: Construction projects involve numerous risks that can impact cost, schedule, quality, safety, and sustainability. Effective risk management is critical for project success. Building Information Modelling (BIM) offers capabilities that can transform risk management across the project lifecycle. This paper provides a systematic review of how BIM can aid core risk management processes including identification, analysis,… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Vishal Verma, Kuldeep Kumar, Rashmi Aggarwal and Tanvi Verma
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 6-10, 2024; DOI: 10.55708/js0301002
Abstract: In this article, it has been proposed a functional design of Baggage Cart with Weighing Mechanism for Hospitality Industry based on empirical observations. This design is expected to promote and become one of the high demand products which can later be used especially by hotels and respective airlines. It has been often observed that travelers… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-24 and the Section Hospitality, Leisure, Sport and Tourism (HLT))

by Liao Jinzhi Lois, Liu Qing, Quan Jing, Ye Qing, Zhang Xi, Hua Younan and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 1-5, 2024; DOI: 10.55708/js0301001
Abstract: A land grid array (LGA) is an integrated circuit design with a grid of contacts connected to other components of a printed circuit board. LGA is used for various high-speed and high-frequency applications due to its small terminal parasitic inductance. However, LGA packages are non-hermetic, as most the components of the LGA, like epoxy molding… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Anam Javaid, Sumaira Aslam, Hira Qaisar, Farhat Batool, Rimsha Javed and Muhammad Waqas Qaisar
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 7-14, 2023; DOI: 10.55708/js0212002
Abstract: Plastics are routinely used in the packaging of materials as well as in industrial production. However, once in the environment, they are non-biodegradable, posing severe threats to the ecosystems. Bioplastic replaces conventional plastic, which is biodegradable due to its biological origin and does not affect environment. Sawdust is a very important agro-waste screened as a… Read More

(This article belongs to the Section Biotechnology and Applied Microbiology (BAM))

by Hua Younan, Liao Jinzhi Lois, Liu Binghai, Zhu Lei and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 1-6, 2023; DOI: 10.55708/js0212001
Abstract: In semiconductor wafer fabrication, the contamination issue by halogens (such as F, Cl, and Br) brings great challenges to metallization processes in the back end of line (BEOL). For aluminum (Al) back-end process, severe metal corrosion may occur by halogens, forming aluminum halide defects. Such halogen-induced metal corrosion issue creates the defects on Al metal… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Supriya Yadav and Gareth Howells
Journal of Engineering Research and Sciences, Volume 2, Issue 10, Page # 1-8, 2023; DOI: 10.55708/js0210001
Abstract: In the digital era, data security in files, databases, accounts, and networks is of utmost importance. Due to the sensitive, private, or protected information they contain, databases are a common target for cyber attacks. To assess threats to data and lower the risk involved with data processing and storage, data security is crucial. Therefore, it… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Software Engineering – Computer Science (SEC))

by Yi Liu, Wendy Wang and Haibo Wang
Journal of Engineering Research and Sciences, Volume 2, Issue 8, Page # 1-18, 2023; DOI: 10.55708/js0208001
Abstract: Cancer is one of the leading causes for death worldwide. Accurate and timely detection of cancer can save lives. As more machine learning algorithms and approaches have been applied in cancer diagnosis, there has been a need to analyze their performance. This study has compared the detection accuracy and speed of nineteen machine learning algorithms… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Medical Informatics (MDI))

by Igor Sergeyev
Journal of Engineering Research and Sciences, Volume 2, Issue 7, Page # 1-9, 2023; DOI: 10.55708/js0207001
Abstract: Fast AC voltage RMS measuring converter with iterative additive error correction which implements an iteratively integrating conversion method is considered. The use of this converter allows a high conversion rate to be achieved. Error analysis of this converter іs described. Bаsіc equations fоr the determing the convergence condition for the error correction process and the… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Henry Ogbemudia Omoregbee, Mabel Usunobun Olanipekun and Bright Aghogho Edward
Journal of Engineering Research and Sciences, Volume 2, Issue 6, Page # 1-9, 2023; DOI: 10.55708/js0206001
Abstract: Neural Network regression (NNR) is considered more effective as compared to multiple neural networks model readily available in Azure to evaluate the Remaining Useful Life (RUL) of bearing in this work because it performs better than other models when used and was demonstrated as a non-programing technique for analyzing enormous data without the use of… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Artificial Intelligence – Computer Science (AIC))

by Yaroslav Pyanylo, Valentyna Sobko, Halyna Pyanylo and Oksana Pyanylo
Journal of Engineering Research and Sciences, Volume 2, Issue 5, Page # 1-9, 2023; DOI: 10.55708/js0205001
Abstract: The paper examines spectral methods based on classical orthogonal polynomials for solving problems of digital information processing. Based on Jacobi polynomials, signal approximation methods are built to identify objects in the natural environment. Based on Chebyshev-Laguerre polynomials, methods of filtering multiplicative signal noises in linear filter models are proposed. Numerical experiments on model problems were… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Mathematics (MAT))

by Muhammad Ahsan Aslam, Muhammad Tariq Ali, Sunwan Nawaz, Saima Shahzadi and Muhammad Ali Fazal
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 22-32, 2023; DOI: 10.55708/js0204003
Abstract: It has been demonstrated that 3D Convolutional Neural Networks (CNN) are an effective technique for classifying hyperspectral images (HSI). Conventional 3D CNNs produce too many parameters to extract the spectral-spatial properties of HSIs. A channel service module and a spatial service module are utilized to optimize characteristic maps and enhance sorting performance in order to… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))