by Javier Urquizo, Diover Bonilla, Francisco Rivera and Rommel Chang
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 1-12, 2023; DOI: 10.55708/js0201001
Abstract: This research is about tuning the automatic generator control (AGC) unit within the National Transmission System (NTG) and is intended to provide a set of key insights into problems related to generator control systems oscillations and the possible available solutions. The case study is the Baba Hydroelectric Power Plant in Ecuador. The aim is to… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Electrical Engineering (ELE))

by Amougou Ngoumou and Marcel Fouda Ndjodo
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 179-185, 2022; DOI: 10.55708/js0105019
Abstract: Evolution in Software Product Line (SPL) is claimed when there are changes in the requirements, product structure or the technology being used. Currently, many different approaches have been proposed on how to manage SPL assets and some also address how evolution affects these assets. However, the usefulness, effectiveness and applicability of these approaches are unclear,… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Vaishnavi Kohale, Samidha Jawade and Ganesh Kakandikar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 116-125, 2022; DOI: 10.55708/js0103012
Abstract: Additive manufacturing creates 3-dimensional objects by depositing materials layer by layer. Different applications of additive manufacturing were examined to determine future growth possibilities. The current research seeks to discover existing additive manufacturing techniques based on the process mechanisms, evaluate modelling approaches based on modelling methodologies, and identify required studies. A significant number of numerical simulations… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Renyan Jiang, Kunpeng Zhang, Xia Xu and Yu Cao
Journal of Engineering Research and Sciences, Volume 3, Issue 10, Page # 44-54, 2024; DOI: 10.55708/js0310005
Abstract: Research on repairable systems in a fleet is mainly concerned with modelling of the failure times using point processes. One important issue is to quantitatively evaluate the heterogeneity among systems, which is usually analyzed using frailty models. Recently, a fleet heterogeneity evaluation method is proposed in the literature. This method describes the heterogeneity with the… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Operations Research and Management Science (ORM))

by Swarup Kumar Mondal and Anindya Sen
Journal of Engineering Research and Sciences, Volume 3, Issue 10, Page # 1-12, 2024; DOI: 10.55708/js0310001
Abstract: Imbalanced dataset handling in real time is one of the most challenging tasks in predictive modelling. This work handles the critical issues arising in imbalanced dataset with implementation of artificial neural network and deep neural network architecture. The usual machine learning algorithms fails to achieve desired throughput with certain input circumstances due to mismatched class… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Artificial Intelligence – Computer Science (AIC))

by Muhammad Numan
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 20-26, 2024; DOI: 10.55708/js0301004
Abstract: Construction projects involve numerous risks that can impact cost, schedule, quality, safety, and sustainability. Effective risk management is critical for project success. Building Information Modelling (BIM) offers capabilities that can transform risk management across the project lifecycle. This paper provides a systematic review of how BIM can aid core risk management processes including identification, analysis,… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Frederick Ojiemhende Ehiagwina, Nurudeen Ajibola Iromini, Ikeola Suhurat Olatinwo, Kabirat Raheem and Khadijat Mustapha
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 19-38, 2022; DOI: 10.55708/js0101003
Abstract: Centralized file-sharing networks have low reliability, scalability issues, and possess a single point of failure, thus making peer-to-peer (P2P) networks an attractive alternative since they are mostly anonymous, autonomous, cooperative, and decentralized. Although, there are review articles on P2P overlay networks and technologies, however, other aspects such as hybrid P2P networks, modelling of P2P, trust… Read More

(This article belongs to the Section Multidisciplinary – Sciences (MLS))