by Shudeb Babu Sen Omit, Md Mohiuddin, Salma Akhter, Md. Hasan Imam, A. K. M. Mostofa Kamal Habib, Syed Mohammad Meraz Hossain and Nitun Kumar Podder
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 32-41, 2024; DOI: 10.55708/js0304004
Abstract: Comorbidity is the co-existence of one or more diseases that occur concurrently or after the primary disease. Patients may have developed comorbidities for COVID-19 that cause harm to the patient’s organs. Besides, patients with existing comorbidities are at high risk, since mortality rates are strongly influenced by comorbidities or former health conditions. Therefore, we developed… Read More

(This article belongs to the Section Mathematical and Computational Biology (MCB))

by Md Tanvir Ahsan, Ji-Peng Wang, Saidov Mirzo Sibgatullovich, Abdelali Dadda and Salikhov Farid Salokhiddinovich
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 20-31, 2024; DOI: 10.55708/js0304003
Abstract: The occurrence of landslides and slope instability along riparian zones has been a recurrent phenomenon of substantial concern globally. This paper presents a comprehensive investigation of riverbank slope stability utilizing soils from the Yellow River in China, with a particular emphasis on the effects of water level fluctuations, precipitation, and vegetation. The research examines the… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Auns Qusai Al-Neami and Zina Ali Abed
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 27-32, 2024; DOI: 10.55708/js0303004
Abstract: Asthma is one of the chronic diseases that affected on the respiratory system. Studies had showed that more than 350 million people who suffering from asthma around the world which is equivalent to 1 in each 12 adults. Many intelligent monitoring systems had proposed in order to help the patient to know the situation before… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Mirza Hodžić and Naser Prljača
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 19-26, 2024; DOI: 10.55708/js0303003
Abstract: Variants of proportional navigation (PN) are perhaps mostly used guidance laws for tactical homing missiles. PN aims to generate commanding missile lateral acceleration proportional to line of sight (LOS) angular rate, so that missile velocity vector rotates in such a way to assure interception of a target. In order to generate commanding lateral accelerations, the… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences (SI-CES 2023-24) and the Section Aerospace Engineering (ARO))

by Muhammad Numan, Usama Saadat and Muhammad Usman Farooq
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 1-7, 2024; DOI: 10.55708/js0302001
Abstract: Building Information Modeling (BIM) provides a robust foundation for driving sustainability across architecture, engineering and construction (AEC) practices. This paper presents a systematic review of literature elucidating the confluence of BIM tools and processes with accelerated performance simulations and green building certification systems needed to guide environmentally sensitive design. Integrated Revit-Insight 360 is shown to… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Muhammad Numan
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 20-26, 2024; DOI: 10.55708/js0301004
Abstract: Construction projects involve numerous risks that can impact cost, schedule, quality, safety, and sustainability. Effective risk management is critical for project success. Building Information Modelling (BIM) offers capabilities that can transform risk management across the project lifecycle. This paper provides a systematic review of how BIM can aid core risk management processes including identification, analysis,… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Liao Jinzhi Lois, Liu Qing, Quan Jing, Ye Qing, Zhang Xi, Hua Younan and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 1-5, 2024; DOI: 10.55708/js0301001
Abstract: A land grid array (LGA) is an integrated circuit design with a grid of contacts connected to other components of a printed circuit board. LGA is used for various high-speed and high-frequency applications due to its small terminal parasitic inductance. However, LGA packages are non-hermetic, as most the components of the LGA, like epoxy molding… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Neha Koppikar and Nidhi Koppikar
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 15-22, 2023; DOI: 10.55708/js0212003
Abstract: Since 2020, people have been getting their body temperatures checked at every public location, social distancing has become a norm, and it has become essential to know who has been in contact with whom. Therefore, we needed a system that helped us solve these challenges, especially in housing societies, as most of the general public… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Anam Javaid, Sumaira Aslam, Hira Qaisar, Farhat Batool, Rimsha Javed and Muhammad Waqas Qaisar
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 7-14, 2023; DOI: 10.55708/js0212002
Abstract: Plastics are routinely used in the packaging of materials as well as in industrial production. However, once in the environment, they are non-biodegradable, posing severe threats to the ecosystems. Bioplastic replaces conventional plastic, which is biodegradable due to its biological origin and does not affect environment. Sawdust is a very important agro-waste screened as a… Read More

(This article belongs to the Section Biotechnology and Applied Microbiology (BAM))

by Nicolas Pajot and Mounir Boukadoum
Journal of Engineering Research and Sciences, Volume 2, Issue 11, Page # 1-14, 2023; DOI: 10.55708/js0211001
Abstract: Solving classification problems by Liquid State Machines (LSM) usually ignores the influence of the liquid state representation on performance, leaving the role to the reader circuit. In most studies, the decoding of the internally generated neural states is performed on spike rate-based vector representations. This approach occults the interspike timing, a central aspect of biological… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences (SI-CES 2023-24) and the Section Neurosciences (NES))

by Yaroslav Pyanylo, Valentyna Sobko, Halyna Pyanylo and Oksana Pyanylo
Journal of Engineering Research and Sciences, Volume 2, Issue 5, Page # 1-9, 2023; DOI: 10.55708/js0205001
Abstract: The paper examines spectral methods based on classical orthogonal polynomials for solving problems of digital information processing. Based on Jacobi polynomials, signal approximation methods are built to identify objects in the natural environment. Based on Chebyshev-Laguerre polynomials, methods of filtering multiplicative signal noises in linear filter models are proposed. Numerical experiments on model problems were… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences (SI-CES 2022-23) and the Section Mathematics (MAT))

by Yasushi Itoh, Takana Kaho and Koji Matsunaga
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 14-21, 2023; DOI: 10.55708/js0204002
Abstract: An advanced load-line analysis software is devised for nonlinear circuit design and simulation of microwave low-distortion, high-efficiency and high-power GaN HEMT amplifiers. A single software package can incorporate DC, small- and large-signal performances of GaN HEMT devices, and then analyze nonlinear performance of amplitude-to-amplitude (AM-AM) and amplitude-to-phase (AM-PM) modulations, and finally evaluate intermodulation distortion (IMD)… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Gian Paolo Jesi and Andrea Odorizzi
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 1-13, 2023; DOI: 10.55708/js0204001
Abstract: This paper focuses on the genesis and evolution of our specific Company tool. It is aimed to tackle the problem of verifying the health status and availability of residual bandwidth between any node over the Lepida ScpA broadband network. In fact, there must be a correspondence between active contractual obligations signed by local network operators… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences (SI-CES 2022-23) and the Section Telecommunications (TEL))

by Elisa Benetti and Gianluca Mazzini
Journal of Engineering Research and Sciences, Volume 2, Issue 3, Page # 16-30, 2023; DOI: 10.55708/js0203002
Abstract: Computational thinking is now featured in many school curricula around the world. It is in fact defined as the "new English", emphasizing its universally recognized indispensability. Despite this, the subject is almost never addressed until primary school where, however, hours dedicated to it are often too limited. Our first training proposal, including basic coding concepts… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences (SI-CES 2022-23) and the Section Education and Educational Research (EER))

by Joel Ogunyemi, Olawale Ezekiel Fagbuaro and Henry Sunday Okeke
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 21-27, 2022; DOI: 10.55708/js0112004
Abstract: Pulse width modulated (PWM) inverter has applications in many areas as it offers control of voltage, frequency, and harmonic in one power stage. In the practical design of three-phase inverter circuits, a proper understanding of the operations and peculiarities of the specific model to be built is necessary. Most often, perhaps due to different models… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Indrit Enesi and Anduel Kuqi
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 9-14, 2022; DOI: 10.55708/js0112002
Abstract: 3D reconstructions are widely used, the main challenge of them is the accuracy especially for small and detailed objects. Various software exists for 3D reconstruction, free and paid ones with various performances. In this paper the performance of 3D object reconstruction will be evaluated in terms of size accuracy. The aim of the paper is… Read More

(This article belongs to the Section Imaging Science and Photographic Technology (IPT))

by Wei Ding, Zhaoming Liu, Hongwei Wang and Long Cui
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 26-35, 2022; DOI: 10.55708/js0110005
Abstract: In the real-time control procession of the vertebral milling robot, there are problems such as heavy workload of the operator, long working time, operational tremble and complicated procession. In order to solve the clinical practical basic problems such as avoiding excessive milling and force perception control of vertebral milling robot, this paper proposes a method… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Automation and Control Systems (ACS))

by Paul Ngo, Jonathan Sprinkle and Rahul Bhadani
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 5-12, 2022; DOI: 10.55708/js0110002
Abstract: Controller Area Network (CAN) bus data is used on most vehicles today to report and communicate sensor data. However, this data is generally encoded and is not directly interpretable by simply viewing the raw data on the bus. However, it is possible to decode CAN bus data and reverse engineer the encodings by leveraging knowledge… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Ya-Ning Chang and Chui-Yu Chiu
Journal of Engineering Research and Sciences, Volume 1, Issue 9, Page # 15-32, 2022; DOI: 10.55708/js0109003
Abstract: The spread of the epidemic caused many people to believe the traditional office model is no longer appropriate for modern business, nor is it compatible with the efficiency and innovation demanded by modern business. Individual accomplishment is not measured by where one works, but by achieving a balance between work and life and establishing a… Read More

(This article belongs to the Section Telecommunications (TEL))

by Shukhrat Egamov, Abduvali Khidirov and Mirzokulov Khotam Bakhtiyor Ugli
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 19-26, 2022; DOI: 10.55708/js0108003
Abstract: The results of studying the possibilities of the properties of magneto-optical qubits obtained using the Faraday rotation effect are presented. Waveguide geometries have been chosen for the design of various information processing and transmission devices based on new concepts creating key elements of logic gates, with new architectures applicable to different fields of science and… Read More

(This article belongs to the Section Applied Physics (APY))

by Chetan Mohanlal Wani, Sachin Ratnakar Deshmukh and Ratnakar Raghunath Ghorpade
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 1-11, 2022; DOI: 10.55708/js0108001
Abstract: Biomedical engineering has become a solution for many biological problems by the application of principles and problem-solving techniques. Pacemakers, artificial bone replacements, 3-D printed organs, and dental replacements are very common examples of an application of engineering in the biomedical field. In medical applications when there is a need for bone replacement in a patient… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Javaid Ahmad Shah
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 13-20, 2022; DOI: 10.55708/js0106003
Abstract: The Fuzzy set theory has numerous real-life applications in almost every field like artificial intelligence, pattern recognition, medical diagnosis etc. There are so many techniques used for solving decision-making problems given by various researchers from time to time. To be able to make consistent and correct choices is the essence of any decision process pervade… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Yankai Xing, Elkhatib Kamal, Bogdan Marinescu and Florent Xavier
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 251-263, 2022; DOI: 10.55708/js0105026
Abstract: In this paper, for the situation of HVDC inserted in meshed AC power grid, a model-matching robust H∞ static output error feedback controller (RSOFC) and model-matching dynamic decoupled output feedback controller (DDOFC) are proposed to improve the damping of inter-area oscillation modes and maintain robustness to face the effects of different operating points and unstable… Read More

(This article belongs to the Section Automation and Control Systems (ACS))

by Amit Moza, Virendra Kumar Paul and Sushil Kumar Solanki
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 198-212, 2022; DOI: 10.55708/js0105021
Abstract: Evaluating complexity, in order to manage it effectively, has been stressed by many researchers as one of the key areas of project management. This, as literature shows, has been done using different methodologies and assessing it from different perspectives resulting in measures that differ in their characteristics, their application, and their relevance with respect to… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Pamela Ramsami and Robert Tat Fung Ah King
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 186-197, 2022; DOI: 10.55708/js0105020
Abstract: The increased penetration of renewable energy sources in the distribution system affects the stability and efficiency of the system. To account for the intermittent nature of these sources, distribution network reconfiguration and the integration of custom power devices are important. This paper aims to identify the optimum location of photovoltaic systems and unified power quality… Read More

(This article belongs to the Section Electronic Engineering (EEE))