by Michael A. Vidalis and Antonios S. Andreatos
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 109-118, 2022; DOI: 10.55708/js0105012
Abstract: The technological revolution in Artificial Intelligence (AI) and Autonomous Robotics is expected to transform societies in ways we cannot even imagine. The way we live, interact, work, and fight wars, will not be like anything witnessed before in human history. This qualitative research paper endeavors to examine the effect of said technological advancements on multiple… Read More

(This article belongs to the Section Ethics (ETH))

by Giovani Manuel Pitra and Kameswara Subrahmanya Sastry Musti
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 52-60, 2022; DOI: 10.55708/js0105006
Abstract: When higher quantities of solar energy is injected into power grid, then it is likely to result in what is known as “Duck curve phenomena”.  The net load under this phenomenon is negative and thus energy generation needs to be curtailed during the peak hours and also a part of the load during off-peak hours… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))

by Maryam Imran Sheik Mamode and Tulsi Pawan Fowdur
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 41-51, 2022; DOI: 10.55708/js0105005
Abstract: 5G is the successor to 4G technology and it has enabled a new level of user experience with much greater speeds and much lower latencies. Scheduling is the method of allocating resources for transmission of data. In this paper, three scheduling algorithms have been investigated, namely Proportional Fair, Round Robin and Best CQI. An uplink… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Telecommunications (TEL))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electronic Engineering (EEE))

by Abdulhalim Musa Abubakar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 170-187, 2022; DOI: 10.55708/js0103018
Abstract: This work aims at providing factual details necessary for the utilization of diverse feedstock for anaerobic digestion (AD) to produce biogas using either conventional or non-conventional types of digesters. This is necessary as different substrates had peculiar merits or potentials of biogas production due to their unique characteristics. Selection of right feedstock is usually based… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Habib M. Hussien, Sultan F. Meko, Konstantinos Katzis, Luzango P. Mfupe and Ephrem T. Bekele
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 98-105, 2022; DOI: 10.55708/js0103010
Abstract: The rapid change in link capacity and user count induced by platform mobility in communication systems based on high altitude platform stations (HAPS) exploiting TV White Space (TVWS) spectrum may result in a high rate of handover failure and reduced resource utilization. In addition, in High Altitude Platform (HAP) wireless networks exploiting TV White Space… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Hai-Yen -Tran, Trung-Minh Bui, Thi-Loan Pham and Van-Hung Le
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 59-67, 2022; DOI: 10.55708/js0103007
Abstract: 2D HumanPose Estimation (2D-HPE) has been widely applied in many practical applications in life su ction, human-robot interaction, using Convolutional Neural Networks (CNNs), which has achieved many good results. In particular, the 2D-HPE results are intermediate in the 3D Human Pose Estimation (3D-HPE) process. In this paper, we perform a study to compare the results… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Ceyda Akıllı, İmam Bakır Arabacı and Engin Kırçıl
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 19-27, 2022; DOI: 10.55708/js0103003
Abstract: Vocational and technical education institutions help to train individuals in a well-equipped manner, increase their employability level, and provide workforce in areas that countries need. Vocational and technical education is of great importance in terms of ensuring the development of countries at the national and international level, training qualified intermediate staff and increasing employment opportunities.… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Ogirima Sanni Abubakar Omuya and Arulogun Oladiran Tayo
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 39-50, 2022; DOI: 10.55708/js0101004
Abstract: Telemedicine is using telecommunications and IT and other ICT tools to widen healthcare services to remote rural areas. ICT global coverage, multicasting ability, and the high capacity of satellites in GEO can be served as an instrument to widen and enhance the high quality of healthcare service to remote rural areas. Long end-to-end latency could… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Onur Eker, Hakan Cevikalp and Hasan Saribas
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 01-09, 2022; DOI: 10.55708/js0101001
Abstract: Fast and accurate observation of an area in disaster scenarios such as earthquake, flood and avalanche is crucial for first aid teams. Digital surface models, orthomosaics and object detection algorithms can play an important role for rapid decision making and response in such scenarios. In recent years, Unmanned Aerial Vehicles (UAVs) have become increasingly popular… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Automation and Control Systems (ACS))