by Juhi Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 13-18, 2022; DOI: 10.55708/js0110003
Abstract: OFDM is one of the important modulation techniques for wireless communication which is the advanced version of FDM. Now-a-days congestion networking is growing like AI, IoT, 5G etc. so there is a need of high data rate with low BER. For such a network there is requirement of high-speed secured data transmission that is multicarrier… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Paul Ngo, Jonathan Sprinkle and Rahul Bhadani
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 5-12, 2022; DOI: 10.55708/js0110002
Abstract: Controller Area Network (CAN) bus data is used on most vehicles today to report and communicate sensor data. However, this data is generally encoded and is not directly interpretable by simply viewing the raw data on the bus. However, it is possible to decode CAN bus data and reverse engineer the encodings by leveraging knowledge… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Zainab Jawad Ahmed, Loay Edwar George and Raad Ahmed Hadi
Journal of Engineering Research and Sciences, Volume 1, Issue 9, Page # 8-14, 2022; DOI: 10.55708/js0109002
Abstract: Some problems want to be solved in image compression to make the process workable and more efficient. Much work had been done in the field of lossy image compression based on wavelet and Discrete Cosine Transform (DCT). In this paper, an efficient image compression scheme is proposed, based on a common encoding transform scheme; It… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Sergey Tarima and Zhanna Zenkova
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 12-18, 2022; DOI: 10.55708/js0108002
Abstract: A product’s life cycle hinges on its sales. Product sales are determined by a combination of market demand, industrial production, logistics, supply chains, labor hours, and countless other factors. Business-specific questions about sales are often formalized into questions relating to specific quantities in sales data. Statistical estimation of these quantities of interest is crucial but… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Statistics & Probability (STP))

by Chetan Mohanlal Wani, Sachin Ratnakar Deshmukh and Ratnakar Raghunath Ghorpade
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 1-11, 2022; DOI: 10.55708/js0108001
Abstract: Biomedical engineering has become a solution for many biological problems by the application of principles and problem-solving techniques. Pacemakers, artificial bone replacements, 3-D printed organs, and dental replacements are very common examples of an application of engineering in the biomedical field. In medical applications when there is a need for bone replacement in a patient… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Mengxing Zhang, Youming Hua, Chunbin Chen, Chenkun Chu and Xiuli Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 44-47, 2022; DOI: 10.55708/js0107007
Abstract: Optical fiber is used in various fields because of its advantages of large-capacity communication, long-distance transmission, low signal crosstalk, good confidentiality, anti-electromagnetic interference, good transmission quality, small size, light weight, and long life. In this paper, the latest research progress of optical fiber sensing technology and its application and development in the field of rotating… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Instruments and Instrumentation (INN))

by Mohamed Touil, Lhoussain Bahatti and Abdelmounime El Magri
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 38-43, 2022; DOI: 10.55708/js0107006
Abstract: Nowadays Corona Virus is threatening everyone, everywhere because it extremely dangerous. For many reasons; the first one it is a contagious virus, the second reason is there is no definite vaccination for that, because even some vaccinated people against Covid were affected. in the same regard this paper will present a telemedicine solution against Covid-19.… Read More

(This article belongs to the Section Health Care Sciences and Services (HCS))

by Gordon Amidu
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 15-19, 2022; DOI: 10.55708/js0107003
Abstract: The purpose of this study was to determine Impact of Gender of Lecturers’ on Learning among the College of Arts and Commerce Students’ at Andhra University. Systematic data collection and analysis efforts resulted in the following findings: A question was presented to find out which lecturer gender produces difficult examination questions. According to the findings,… Read More

(This article belongs to the Section Library Science (LBS))

by Omega Sarjiyus and Israel Isaiah
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 45-54, 2022; DOI: 10.55708/js0106006
Abstract: Right now, colleges, as focuses of exploration and development, coordinate in their cycles different advances that permit further developing administrations and cycles for their individuals. Among the inventive innovations is the Web of Things that permits getting information from the climate and individuals through various gadgets. Security of information on college grounds is expected to… Read More

(This article belongs to the Section Cybernetics – Computer Science (CYC))

by Konstantinos Barlas and Petros Stefaneas
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 243-250, 2022; DOI: 10.55708/js0105025
Abstract: Java Script Object Notation (JSON) is an open standard data format that is used widely across the internet data due to its low overhead. While originally created in the early 2000s, it has only gained standard status in 2013 and then again in 2017 with a new version that focused more on security and interoperability.… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Naireeta Deb and Rajendra Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 231-242, 2022; DOI: 10.55708/js0105024
Abstract: Existing extremely fast charging (XFC) of electrical vehicles (EVs) is based on silicon power electronics and internal conversion of AC power into DC power.  In this paper it has been shown that silicon carbide power electronics and the use of DC power source in the design of XFC of EVs has many distinct advantages over… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022)

by Hamza Fahmy, Mohamed Mazouzi, Ayoub Alami Masmoudi and Tamasna El Mehdi
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 223-230, 2022; DOI: 10.55708/js0105023
Abstract: Because firms are considering the influence of their operations on the environment, the green supply chain has become a crucial indication of corporate performance. The issues here necessitate both competent management and a fresh, innovative strategy for cost reduction, productivity enhancement, and natural resource protection. We shall try to understand the Barriers of Green Supply… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Green and Sustainable Science & Technology (GSS))

by Suleiman Taha and Raed Saeed Mohammad Daraghma
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 154-159, 2022; DOI: 10.55708/js0105016
Abstract: In this post, we built a small gadget that can be placed in the front of the cockpit, closer to the driver, and can be accessed by both the taxi driver and the passenger.  It is simple to operate since it has a crystal display that displays a wealth of information about both the section… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Construction and Building Technology (CBT))

by Rishabh Rastogi, Sushil Kumar Solanki and Virendra Kumar Paul
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 71-78, 2022; DOI: 10.55708/js0105008
Abstract: Across various barriers pertaining to prefabricated building construction projects, a major barrier identified by the literature was integration of various components of prefabricated building project supply chain network, including the material and human resource supply chains. The literature suggests a need of exploring this barrier of supply chain integration into its various sub factors/challenges (termed… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Mechanics (MEC))

by Gonzalo Tapia, Rodrigo Salas, Matías Salinas, Carolina Saavedra, Alejandro Veloz, Alexis Arriola, Steren Chabert and Antonio Glaría
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 161-174, 2022; DOI: 10.55708/js0104018
Abstract: Pressure (BP) waveform is a result of the response of the arteries to the blood ejectionproduced by tant indicator of the state of the cardiovascular system. Currently, its measurement is performed invasively in critically ill patients who need a continuous and real time monitoring of their treatment response, however, it is possible to measure the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Kiman Silas, Aliyu B. Ngulde and Habiba D. Mohammed
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 137-147, 2022; DOI: 10.55708/js0104016
Abstract: Cadmium (Cd) is known to have adverse effects on the kidney, liver, bones and cardio-pulmonary system, this heavy metal is usually consumed from drinking water with higher Cd acceptable limits. In this study, Activated Carbon (AC) is produced from Date Tree Leaf (DTL) and impregnated with Zinc Oxide catalyst, where an adsorbent (ZnO/DTL) was developed… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Salita and Khoula Maryam
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 54-61, 2022; DOI: 10.55708/js0104007
Abstract: This paper aims at determining the factors responsible for shaping as well as building political ideas and values. By conducting a survey in a Public University in Pakistan and filling of questionnaires by the respondents, results were obtained. Estimation results showed that Media and education emerged as the domineering factors significantly contributing in the political… Read More

(This article belongs to the Section Economics (ECN))

by Festus Chukwudi Onyeka, Chidobere David Nwa-David and Thompson Edozie Okeke
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 28-37, 2022; DOI: 10.55708/js0104004
Abstract: In this paper, a polynomial displacement function is developed to evaluate the stability of rectangular thick plate that is freely supported at the third edge and other three edges simply supported (SSFS). Employing three-dimensional (3-D) constitutive relations which consist of entire stress components, the functional for total potential energy was obtained. The governing equations plate… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Radoslav Hrischev
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 22-27, 2022; DOI: 10.55708/js0104003
Abstract: This article is a result of the need to quickly and efficiently organize distance learning for students during the pandemic caused by COVID-19. Some e-learning opportunities provided by internet technologies, web-based platforms, online engineering tools are presented. Examples of training students in business information systems based on learning platforms and demo systems are presented, as… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Roberto Mazzolin and Asad Madni
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 09-21, 2022; DOI: 10.55708/js0104002
Abstract: Executive leadership in government, military and industry are faced with many difficult challenges when trying to understand the complex interaction of public and government security policies, the vulnerabilities in the wide array of key technologies supporting critical infrastructure upon which society is vitally dependent, and the identification of key cyber security trends that will need… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Vladimir Arabadzhi
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 01-08, 2022; DOI: 10.55708/js0104001
Abstract: The problem of acoustic monochromatic radiation by boundary with a traveling distribution of phases of normal vibrational velocities is considered. It is shown that when the spatial frequency of the traveling phase of normal velocities approaches the wave number in the medium, the energy transfer from boundary   into a “sliding” (with respect to the boundary)… Read More

(This article belongs to the Section Acoustics (ACO))