by Amol M Khatkhate, Varad Raut, Madhura Jadhav, Shreya Alva, Kalpesh Vichare and Ameya Nadkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 36-44, 2022; DOI: 10.55708/js0106005
Abstract: The research in this paper focuses on the capture of respiratory patterns in real-time through a minor modification of an anti-snoring device that is readily available off the shelf or can be bought online and attaching a microphone to it. The audio pattern is recorded for the various lung conditions at different stages. The data… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Biochemical Research Methods (BRM))

by Debasmita Bhoumik, Pinaki Sen, Ritajit Majumdar, Susmita Sur-Kolay, Latesh Kumar KJ and Sundaraja Sitharama Iyengar
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 21-35, 2022; DOI: 10.55708/js0106004
Abstract: Errors in surface code have typically been decoded by Minimum Weight Perfect Matching (MWPM) bas -based Machine Learning (ML) techniques have been employed for this purpose, although how an ML decoder will behave in a more realistic asymmetric noise model has not been studied. In this article we (i) establish a methodology to formulate the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Applied Mathematics (APM))

by Javaid Ahmad Shah
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 13-20, 2022; DOI: 10.55708/js0106003
Abstract: The Fuzzy set theory has numerous real-life applications in almost every field like artificial intelligence, pattern recognition, medical diagnosis etc. There are so many techniques used for solving decision-making problems given by various researchers from time to time. To be able to make consistent and correct choices is the essence of any decision process pervade… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Venu Paritala and Harsha Thummala
Journal of Engineering Research and Sciences, Volume 1, Issue 6, Page # 1-6, 2022; DOI: 10.55708/js0106001
Abstract: The main objective of this research analyze and correlates the number of cases and death rates reported on the Ebola virus in many countries. Ebola virus is one of the most lethal diseases to infect humans. This approach Proceeding uses the Factorial analysis technique in the Ebola Virus dataset. This method takes the largest common… Read More

(This article belongs to the Section Statistics & Probability (STP))

by Yankai Xing, Elkhatib Kamal, Bogdan Marinescu and Florent Xavier
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 251-263, 2022; DOI: 10.55708/js0105026
Abstract: In this paper, for the situation of HVDC inserted in meshed AC power grid, a model-matching robust H∞ static output error feedback controller (RSOFC) and model-matching dynamic decoupled output feedback controller (DDOFC) are proposed to improve the damping of inter-area oscillation modes and maintain robustness to face the effects of different operating points and unstable… Read More

(This article belongs to the Section Automation and Control Systems (ACS))

by Philip Marothi Lemekwane and Nkqubela Ruxwana
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 213-222, 2022; DOI: 10.55708/js0105022
Abstract: To determine what needs to be done, organisations throughout the world need the capability to find out quickly, what is happening and why it happened. Therefore, having the intelligence to make informed decisions at the right time and place is the key to success in today's dynamic environment. As mobile systems become increasingly available, more… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Amit Moza, Virendra Kumar Paul and Sushil Kumar Solanki
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 198-212, 2022; DOI: 10.55708/js0105021
Abstract: Evaluating complexity, in order to manage it effectively, has been stressed by many researchers as one of the key areas of project management. This, as literature shows, has been done using different methodologies and assessing it from different perspectives resulting in measures that differ in their characteristics, their application, and their relevance with respect to… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Pamela Ramsami and Robert Tat Fung Ah King
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 186-197, 2022; DOI: 10.55708/js0105020
Abstract: The increased penetration of renewable energy sources in the distribution system affects the stability and efficiency of the system. To account for the intermittent nature of these sources, distribution network reconfiguration and the integration of custom power devices are important. This paper aims to identify the optimum location of photovoltaic systems and unified power quality… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Amougou Ngoumou and Marcel Fouda Ndjodo
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 179-185, 2022; DOI: 10.55708/js0105019
Abstract: Evolution in Software Product Line (SPL) is claimed when there are changes in the requirements, product structure or the technology being used. Currently, many different approaches have been proposed on how to manage SPL assets and some also address how evolution affects these assets. However, the usefulness, effectiveness and applicability of these approaches are unclear,… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Sunil Kumar Dyavaranahalli Sannappa, Kiran, Sudheesh Kannur Vasudeva Rao and Yashwanth Jagadeesh
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 160-166, 2022; DOI: 10.55708/js0105017
Abstract: Investigation on verification of offline signature has explored a huge sort of techniques on more than one signature datasets, which can be amassed beneath managed conditions. However, these records will not necessarily reflect the characteristics of the signatures in some useful use cases. In this work, introduced a novel feature representation technique called edge histogram… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Sohail Shaikh, Deepak Hujare and Shrikant Yadav
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 134-144, 2022; DOI: 10.55708/js0105014
Abstract: With the dominance of a technical and volatile environment with enormous consumer demands, this study aims to investigate the advancements in quality assurance in the era of Industry 4.0. For better production efficiency, rapid and robust automated quality visual inspection is developing rapidly in product quality control. Deep neural network architecture is built for a… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Charles Darko
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 119-133, 2022; DOI: 10.55708/js0105013
Abstract: Proper use of the Blackboard Learning Management System (LMS) motivates students to engage with their studies but the students within Material Science and Engineering (MSE) often use these LMSs to copy mathematical derivations, scientific information and submit coursework tasks without spending much time interacting with the system. Quantitatively, there is a piece of missing information… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Yubaraj Gautam, Kazuhiko Sato and Bishnu Prasad Gautam
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 88-101, 2022; DOI: 10.55708/js0105010
Abstract: Software-Defined Networking (SDN) is an emerging Network technology that can augment the data plane with control plane by using programming technique. However, there are a numbers of security challenges which are required to address to achieve secured communication. Flooding attack is one of the most common threats on the internet for the last decades which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Mechanics (MEC))

by Giovani Manuel Pitra and Kameswara Subrahmanya Sastry Musti
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 52-60, 2022; DOI: 10.55708/js0105006
Abstract: When higher quantities of solar energy is injected into power grid, then it is likely to result in what is known as “Duck curve phenomena”.  The net load under this phenomenon is negative and thus energy generation needs to be curtailed during the peak hours and also a part of the load during off-peak hours… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Maryam Imran Sheik Mamode and Tulsi Pawan Fowdur
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 41-51, 2022; DOI: 10.55708/js0105005
Abstract: 5G is the successor to 4G technology and it has enabled a new level of user experience with much greater speeds and much lower latencies. Scheduling is the method of allocating resources for transmission of data. In this paper, three scheduling algorithms have been investigated, namely Proportional Fair, Round Robin and Best CQI. An uplink… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Telecommunications (TEL))

by Joshua Ogbebor, Xiangyu Meng and Xihai Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 25-33, 2022; DOI: 10.55708/js0105003
Abstract: This paper outlines a method for obtaining the optimal control policy for an autonomous vehicle appro med that traffic signal phase and timing information can be made available to the autonomous vehicle as the vehicle approaches the traffic signal. Constraints on the vehicle’s speed and acceleration are considered and a microscopic fuel consumption model is… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Automation and Control Systems (ACS))

by Viacheslav Sergeevich Okunev
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 01-16, 2022; DOI: 10.55708/js0105001
Abstract: The main goal of the work was the development of software and codes for the design of new generation nuclear reactors. The problem is solved by the example of fast reactors with a liquid metal coolant. The problem is solved within the framework of system analysis methods and operations drawing methods. Three groups of methods… Read More

(This article belongs to the Section Nuclear Science and Technology (NST))

by Gonzalo Tapia, Rodrigo Salas, Matías Salinas, Carolina Saavedra, Alejandro Veloz, Alexis Arriola, Steren Chabert and Antonio Glaría
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 161-174, 2022; DOI: 10.55708/js0104018
Abstract: Pressure (BP) waveform is a result of the response of the arteries to the blood ejectionproduced by tant indicator of the state of the cardiovascular system. Currently, its measurement is performed invasively in critically ill patients who need a continuous and real time monitoring of their treatment response, however, it is possible to measure the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Kiman Silas, Aliyu B. Ngulde and Habiba D. Mohammed
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 137-147, 2022; DOI: 10.55708/js0104016
Abstract: Cadmium (Cd) is known to have adverse effects on the kidney, liver, bones and cardio-pulmonary system, this heavy metal is usually consumed from drinking water with higher Cd acceptable limits. In this study, Activated Carbon (AC) is produced from Date Tree Leaf (DTL) and impregnated with Zinc Oxide catalyst, where an adsorbent (ZnO/DTL) was developed… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electronic Engineering (EEE))

by Awais Ahmad and Peter Mozelius
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 119-126, 2022; DOI: 10.55708/js0104014
Abstract: The population of older adults globally increased during the last couple of decades. Due to these demographic changes, the need for medical care has also significantly increased. Despite the age-related disabilities and chronic diseases, most older adults prefer independent living in their home environment. Technology-enhanced systems and eHealth applications seem to provide some promising solutions… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Abdulhalim Musa Abubakar, Kiman Silas and Mohammed Modu Aji
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 93-118, 2022; DOI: 10.55708/js0104013
Abstract: World search for ways to properly manage rural and urban waste generated on daily basis from domestic and industrial buildings, perhaps leads to the adoption of the anaerobic digestion (AD) systems. The system utilizes microorganisms such as viruses, fungi, helminths, bacteria and protozoa to degrade waste so as to generate useful by-products such as biogas,… Read More

(This article belongs to the Section Chemical Engineering (CHE))