by Hamza Fahmy, Mohamed Mazouzi, Ayoub Alami Masmoudi and Tamasna El Mehdi
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 223-230, 2022; DOI: 10.55708/js0105023
Abstract: Because firms are considering the influence of their operations on the environment, the green supply chain has become a crucial indication of corporate performance. The issues here necessitate both competent management and a fresh, innovative strategy for cost reduction, productivity enhancement, and natural resource protection. We shall try to understand the Barriers of Green Supply… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Green and Sustainable Science & Technology (GSS))

by Pamela Ramsami and Robert Tat Fung Ah King
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 186-197, 2022; DOI: 10.55708/js0105020
Abstract: The increased penetration of renewable energy sources in the distribution system affects the stability and efficiency of the system. To account for the intermittent nature of these sources, distribution network reconfiguration and the integration of custom power devices are important. This paper aims to identify the optimum location of photovoltaic systems and unified power quality… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Amougou Ngoumou and Marcel Fouda Ndjodo
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 179-185, 2022; DOI: 10.55708/js0105019
Abstract: Evolution in Software Product Line (SPL) is claimed when there are changes in the requirements, product structure or the technology being used. Currently, many different approaches have been proposed on how to manage SPL assets and some also address how evolution affects these assets. However, the usefulness, effectiveness and applicability of these approaches are unclear,… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Hocine Merzouki, Nada Matta, Hassan Atifi and Francois Rauscher
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 167-178, 2022; DOI: 10.55708/js0105018
Abstract: The notion of competence is multidimensional and polysemic. Several definitions of this notion are present in the literature according to disciplines such as industry, sociology, management, psychology, etc. It often refers to the experience, knowledge, abilities, skills, behaviors, and attitudes that allow valuable action in a workplace. Beyond its intrinsic value for the individual, competence… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Suleiman Taha and Raed Saeed Mohammad Daraghma
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 154-159, 2022; DOI: 10.55708/js0105016
Abstract: In this post, we built a small gadget that can be placed in the front of the cockpit, closer to the driver, and can be accessed by both the taxi driver and the passenger.  It is simple to operate since it has a crystal display that displays a wealth of information about both the section… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Sohail Shaikh, Deepak Hujare and Shrikant Yadav
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 134-144, 2022; DOI: 10.55708/js0105014
Abstract: With the dominance of a technical and volatile environment with enormous consumer demands, this study aims to investigate the advancements in quality assurance in the era of Industry 4.0. For better production efficiency, rapid and robust automated quality visual inspection is developing rapidly in product quality control. Deep neural network architecture is built for a… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Charles Darko
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 119-133, 2022; DOI: 10.55708/js0105013
Abstract: Proper use of the Blackboard Learning Management System (LMS) motivates students to engage with their studies but the students within Material Science and Engineering (MSE) often use these LMSs to copy mathematical derivations, scientific information and submit coursework tasks without spending much time interacting with the system. Quantitatively, there is a piece of missing information… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Michael A. Vidalis and Antonios S. Andreatos
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 109-118, 2022; DOI: 10.55708/js0105012
Abstract: The technological revolution in Artificial Intelligence (AI) and Autonomous Robotics is expected to transform societies in ways we cannot even imagine. The way we live, interact, work, and fight wars, will not be like anything witnessed before in human history. This qualitative research paper endeavors to examine the effect of said technological advancements on multiple… Read More

(This article belongs to the Section Ethics (ETH))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 102-108, 2022; DOI: 10.55708/js0105011
Abstract: The derivation of the transfer function of the output filter of the electromagnetic compatibility of the inverter, loaded by RL-branch, proposed, which differs by taking into account the presence of resistances in the longitudinal and transverse branches of the L-shaped filter. The form of recording the voltage transfer function of an electrical transformer loaded by… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Construction and Building Technology (CBT))

by Rishabh Rastogi, Sushil Kumar Solanki and Virendra Kumar Paul
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 71-78, 2022; DOI: 10.55708/js0105008
Abstract: Across various barriers pertaining to prefabricated building construction projects, a major barrier identified by the literature was integration of various components of prefabricated building project supply chain network, including the material and human resource supply chains. The literature suggests a need of exploring this barrier of supply chain integration into its various sub factors/challenges (termed… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Mechanics (MEC))

by Giovani Manuel Pitra and Kameswara Subrahmanya Sastry Musti
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 52-60, 2022; DOI: 10.55708/js0105006
Abstract: When higher quantities of solar energy is injected into power grid, then it is likely to result in what is known as “Duck curve phenomena”.  The net load under this phenomenon is negative and thus energy generation needs to be curtailed during the peak hours and also a part of the load during off-peak hours… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Maryam Imran Sheik Mamode and Tulsi Pawan Fowdur
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 41-51, 2022; DOI: 10.55708/js0105005
Abstract: 5G is the successor to 4G technology and it has enabled a new level of user experience with much greater speeds and much lower latencies. Scheduling is the method of allocating resources for transmission of data. In this paper, three scheduling algorithms have been investigated, namely Proportional Fair, Round Robin and Best CQI. An uplink… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Telecommunications (TEL))

by Muhammad Tanveer Riaz, Umar Saeed, Saba Waseem, Sidra Riaz and Eman Manzoor Ahmed
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 34-40, 2022; DOI: 10.55708/js0105004
Abstract: The power balancing is the issue that creates when voltage fluctuations occur in the DC microgrid. In order to compensate for the DC bus voltages in the DC microgrid, the energy storage system is used. This system absorbs or releases the power to make the DC bus voltages is stable. In this research, a bidirectional… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Vijay Kumar, Muskan Khajuria and Anshu Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 17-24, 2022; DOI: 10.55708/js0105002
Abstract: Depression is a mental condition that can have serious negative effects on an individual’s thoughts and nd health problems that could lead to grave heart diseases. Depression detection has become necessary in community dwellers considering the lifestyle being followed. Here we use NHANES dataset to compare the performance of various machine learning algorithms in depression… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Viacheslav Sergeevich Okunev
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 01-16, 2022; DOI: 10.55708/js0105001
Abstract: The main goal of the work was the development of software and codes for the design of new generation nuclear reactors. The problem is solved by the example of fast reactors with a liquid metal coolant. The problem is solved within the framework of system analysis methods and operations drawing methods. Three groups of methods… Read More

(This article belongs to the Section Nuclear Science and Technology (NST))

by Gonzalo Tapia, Rodrigo Salas, Matías Salinas, Carolina Saavedra, Alejandro Veloz, Alexis Arriola, Steren Chabert and Antonio Glaría
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 161-174, 2022; DOI: 10.55708/js0104018
Abstract: Pressure (BP) waveform is a result of the response of the arteries to the blood ejectionproduced by tant indicator of the state of the cardiovascular system. Currently, its measurement is performed invasively in critically ill patients who need a continuous and real time monitoring of their treatment response, however, it is possible to measure the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Jigneshkumar Patel and Vijay Sood
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 148-160, 2022; DOI: 10.55708/js0104017
Abstract: Cascaded H-bridge multilevel inverters (CHB-MLI) are employed in a variety of medium/high power applications. These inverters are known to inject unwanted harmonics into the grid, which negatively affects the grid and connected loads. CHB-MLI topology can reduce many of these harmonics by producing multiple output voltage levels and improves the fundamental component using a suitable… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Kiman Silas, Aliyu B. Ngulde and Habiba D. Mohammed
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 137-147, 2022; DOI: 10.55708/js0104016
Abstract: Cadmium (Cd) is known to have adverse effects on the kidney, liver, bones and cardio-pulmonary system, this heavy metal is usually consumed from drinking water with higher Cd acceptable limits. In this study, Activated Carbon (AC) is produced from Date Tree Leaf (DTL) and impregnated with Zinc Oxide catalyst, where an adsorbent (ZnO/DTL) was developed… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electronic Engineering (EEE))

by Awais Ahmad and Peter Mozelius
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 119-126, 2022; DOI: 10.55708/js0104014
Abstract: The population of older adults globally increased during the last couple of decades. Due to these demographic changes, the need for medical care has also significantly increased. Despite the age-related disabilities and chronic diseases, most older adults prefer independent living in their home environment. Technology-enhanced systems and eHealth applications seem to provide some promising solutions… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Muhammad Zia ur Rahman, Saba Waseem, Sidra Riaz, Zainab Riaz, Aneeq Asif, Ayesha Siddiqa and Ali Asghar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 87-92, 2022; DOI: 10.55708/js0104012
Abstract: This paper explains the algorithm for fire alarm for the purpose of safety from any loss and property damage. Here, the designed algorithm is for the comparison of captured pictures. The purpose of comparison is to validate our results. In captured pictures, there may exist fire colour in pictures, which is the indication of fire… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Sudheesh Kannur Vasudeva Rao, Kiran, Naveen Kumar and Mahadevaswamy
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 74-80, 2022; DOI: 10.55708/js0104010
Abstract: Identification of Finite Impulse Response (FIR) filters refer to finding out the coefficients also known as the weights of its transfer function. Adaptive filtering using Least Mean Square (LMS) Algorithm is used to find the estimated weights of the transfer function, using ATMEGA16 processor. This method can be used to find the coefficients of complex… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Chris Nikolopoulos and Ryan Koralik
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 48-53, 2022; DOI: 10.55708/js0104006
Abstract: Prediction of plant growth and yield is one of the essential tasks that enables growers of food and agricultural products to effectively manage their crops. In this paper, a hybrid evolutionary/fuzzy machine learning approach is introduced where a genetic algorithm is deployed to learn the optimum membership functions of relevant fuzzy sets and a knowledge… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))