by Vaishnavi Kohale, Samidha Jawade and Ganesh Kakandikar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 116-125, 2022; DOI: 10.55708/js0103012
Abstract: Additive manufacturing creates 3-dimensional objects by depositing materials layer by layer. Different applications of additive manufacturing were examined to determine future growth possibilities. The current research seeks to discover existing additive manufacturing techniques based on the process mechanisms, evaluate modelling approaches based on modelling methodologies, and identify required studies. A significant number of numerical simulations… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Ravi Jaiswal
Journal of Engineering Research and Sciences, Volume 4, Issue 7, Page # 1-14, 2025; DOI: 10.55708/js0407001
Abstract: For mid-sized manufacturing firms, the Enterprise Resource Planning (ERP) system plays a crucial role in streamlining operations and enabling strategic growth. Both adopting cloud-based ERP solutions and continuing to use On-Premise applications like QAD are important decisions as digital transformation increases. In this study, we conduct a retrospective case study of the cost-benefit analysis of… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Maikel Leon
Journal of Engineering Research and Sciences, Volume 4, Issue 4, Page # 8-19, 2025; DOI: 10.55708/js0404002
Abstract: This paper explores the crucial role of Artificial Intelligence (AI) in driving digital transformation across industries. It examines machine learning, deep learning, fuzzy logic, genetic algorithms, reinforcement learning, and generative AI techniques, highlighting their development, applications, and examples. Case studies showcase AI’s impact in optimizing supply chains, improving financial operations, boosting customer engagement, and revolutionizing… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2025) and the Section Artificial Intelligence – Computer Science (AIC))

by Hua Younan, Liao Jinzhi Lois, Zhu Lei, Liu Binghai and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 8-14, 2024; DOI: 10.55708/js0302002
Abstract: For the semiconductor manufacturing processes, metal corrosion by halogen elements (e.g. fluorine, chlorine, and bromine) is always a critical issue. For the aluminum back-end-of-processes, these halogen elements tend to form aluminum halide defects on the surface of aluminum pads or aluminum metal wires, which can directly lead to the failure and reliability issues of the… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Karnam Shri Harsh and Surbhi Razdan
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 29-37, 2022; DOI: 10.55708/js0107005
Abstract: The present paper reviews an air spring, its types and construction, manufacturing process, testing and process of FEA analysis. Air spring is of three types - Sleeve-type air spring (SAS), Rolling-Lobe Air-Spring (RLAS), and Convoluted Air Spring (CAS). Spring stiffness is the main factor during manufacturing; to obtain it by FEA analysis and experimentation process… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Naireeta Deb and Rajendra Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 231-242, 2022; DOI: 10.55708/js0105024
Abstract: Existing extremely fast charging (XFC) of electrical vehicles (EVs) is based on silicon power electronics and internal conversion of AC power into DC power.  In this paper it has been shown that silicon carbide power electronics and the use of DC power source in the design of XFC of EVs has many distinct advantages over… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Mechanics (MEC))

by Joohoon Je and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 148-152, 2022; DOI: 10.55708/js0103015
Abstract: The center of gravity of a three-dimensional object found through an experimental method can be made easier and faster than calculating the movement manually to make it look more natural in graphic computer images. In addition, in various sports such as skating, the score can be increased by appropriately moving the position of the center… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Multidisciplinary – Materials Science (MLM))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))