by Sushil Ashok Surwase, Suribabu Badde and R. Balakrishnan
Journal of Engineering Research and Sciences, Volume 5, Issue 1, Page # 9-28, 2026; DOI: 10.55708/js0501002
Abstract: Data centers have become the backbone of an increasingly digitized world, supporting the rapid growth of cloud computing, big data, IoT, 5G, and other emerging IT technologies, with rising demand and innovations in AI and ML reinforcing their significance. Data centers are energy intensive, with data processing and storage accounting for 3 to 4% of… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2025) and the Section Mechanical Engineering (MEE))

by Ishfaq Hussain
Journal of Engineering Research and Sciences, Volume 4, Issue 9, Page # 1-11, 2025; DOI: 10.55708/js0409001
Abstract: In response to the global imperative for sustainable solutions, this study investigates the finite element analysis (FEA) and optimization of bamboo as a material for bicycle frames. As eco-friendly transportation gains importance, bicycles are recognized as a key component of sustainable mobility. This research utilizes FEA to thoroughly examine the structural performance of bamboo frames,… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Karnam Shri Harsh and Surbhi Razdan
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 29-37, 2022; DOI: 10.55708/js0107005
Abstract: The present paper reviews an air spring, its types and construction, manufacturing process, testing and process of FEA analysis. Air spring is of three types - Sleeve-type air spring (SAS), Rolling-Lobe Air-Spring (RLAS), and Convoluted Air Spring (CAS). Spring stiffness is the main factor during manufacturing; to obtain it by FEA analysis and experimentation process… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Yash Patil, Shivraj Patil, Suhas Gawade, Vaishnav Shinde and Samidha Jawade
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 62-67, 2022; DOI: 10.55708/js0104008
Abstract: Belt conveyor system is mostly used in industries for transportation of raw materials and finished products. This paper includes study of detailed design procedure and analysis of flat belt conveyor components for light duty applications. Belt conveyors used for segregation of defective products up to 2 kg maximum load whose conveyor capacity is 2 TPH… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Vaishnavi Kohale, Samidha Jawade and Ganesh Kakandikar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 116-125, 2022; DOI: 10.55708/js0103012
Abstract: Additive manufacturing creates 3-dimensional objects by depositing materials layer by layer. Different applications of additive manufacturing were examined to determine future growth possibilities. The current research seeks to discover existing additive manufacturing techniques based on the process mechanisms, evaluate modelling approaches based on modelling methodologies, and identify required studies. A significant number of numerical simulations… Read More

(This article belongs to the Section Mechanical Engineering (MEE))