by Prashobh Karunakaran and Mohammad Shahril Osman
Journal of Engineering Research and Sciences, Volume 3, Issue 7, Page # 1-10, 2024; DOI: 10.55708/js0307001
Abstract: This paper aims to narrow the gap of the narratives blasted out in the media (including social media) about electric cars versus the conventional way humans have been transported over the last 100 years. The ICE industry is closely connected to the O & G because 64 % of the output of the O &… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Reham Almutairi, Giacomo Berg and Graham Morgan
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 33-40, 2024; DOI: 10.55708/js0306004
Abstract: The increasing popularity and attention in Vehicular Ad-hoc Networks (VANETs) have prompted researchers to develop accurate and realistic simulation tools. Realistic simulation for VANETs is challenging due to the high mobility of vehicles and the need to integrate various communication modalities such as Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) interactions. Existing simulators lack the capability to… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Transportation Science & Technology (TST))

by Sambalaye Diop, Papa Silly Traore, Mamadou Lamine Ndiaye and Issa Zerbo
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 1-9, 2024; DOI: 10.55708/js0306001
Abstract: The Taïba Ndiaye wind farm, connected to the SENELEC grid, plays a key role in offsetting shortfalls in electricity consumption, with an installed capacity of 158.7 MW. Moreover, as an intermittent power station, its production is highly dependent on the environmental conditions in the region. Bad weather can disrupt the electricity network, requiring forecasting methods… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Electrical Engineering (ELE))

by Shudeb Babu Sen Omit, Md Mohiuddin, Salma Akhter, Md. Hasan Imam, A. K. M. Mostofa Kamal Habib, Syed Mohammad Meraz Hossain and Nitun Kumar Podder
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 32-41, 2024; DOI: 10.55708/js0304004
Abstract: Comorbidity is the co-existence of one or more diseases that occur concurrently or after the primary disease. Patients may have developed comorbidities for COVID-19 that cause harm to the patient’s organs. Besides, patients with existing comorbidities are at high risk, since mortality rates are strongly influenced by comorbidities or former health conditions. Therefore, we developed… Read More

(This article belongs to the Section Mathematical and Computational Biology (MCB))

by Abdullah Y. Al-Maliki, Kamran Iqbal and Gannon White
Journal of Engineering Research and Sciences, Volume 3, Issue 4, Page # 1-9, 2024; DOI: 10.55708/js0304001
Abstract: Estimating the natural voluntary movement of human joints in its entirety is a challenging problem especially when high accuracy is desired. In this paper, we build a modular estimator to estimate the elbow joint motion including angular displacement and direction. Being modular, this estimator can be scaled for application to other joints. We collected surface… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Health Care Sciences and Services (HCS))

by Jing Zhang and Ziyang Liu
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 1-12, 2024; DOI: 10.55708/js0303001
Abstract: As the market economy has continued to develop, businesses have consistently prioritized profits, excessively emphasizing income and financial gains while neglecting ecological conservation and financial fraud. Consequently, the phenomenon of "greenwashing" has emerged. How to prevent this "greenwashing" phenomenon while pursuing economic benefits and enabling high-quality business development has become a focal point. Therefore, this… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Business and Finance (BUF))

by Huaxi (Yulin) Zhang, Yuyang Wang, Xiaochuan Luo, Baptiste Mereaux and Lei Zhang
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 22-42, 2024; DOI: 10.55708/js0302004
Abstract: Robust and accurate localization is crucial for mobile robot navigation in complex indoor environments. This paper introduces a robust and integrated robot localization algorithm designed for such environments. The proposed algorithm, named Branch-and-Bound for Robust Localization (BB-RL), introduces an innovative approach that seamlessly integrates global localization, position tracking, and resolution of the kidnapped robot problem… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Robotics (ROB))

by Hua Younan, Liao Jinzhi Lois, Zhu Lei, Liu Binghai and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 8-14, 2024; DOI: 10.55708/js0302002
Abstract: For the semiconductor manufacturing processes, metal corrosion by halogen elements (e.g. fluorine, chlorine, and bromine) is always a critical issue. For the aluminum back-end-of-processes, these halogen elements tend to form aluminum halide defects on the surface of aluminum pads or aluminum metal wires, which can directly lead to the failure and reliability issues of the… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Liao Jinzhi Lois, Liu Qing, Quan Jing, Ye Qing, Zhang Xi, Hua Younan and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 1-5, 2024; DOI: 10.55708/js0301001
Abstract: A land grid array (LGA) is an integrated circuit design with a grid of contacts connected to other components of a printed circuit board. LGA is used for various high-speed and high-frequency applications due to its small terminal parasitic inductance. However, LGA packages are non-hermetic, as most the components of the LGA, like epoxy molding… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Yi Liu, Wendy Wang, Haibo Wang and Bahram Alidaee
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 23-33, 2023; DOI: 10.55708/js0212004
Abstract: Information extracted from remote sensing data can be applied to monitor the business and natural environments of a geographic area. Although a wide range of classical machine learning techniques have been utilized to obtain such information, their performance differs greatly in classification accuracy. In this study, we aim to examine whether quantum-enhanced machine learning can… Read More

(This article belongs to the Section Remote Sensing (RMS))

by Anam Javaid, Sumaira Aslam, Hira Qaisar, Farhat Batool, Rimsha Javed and Muhammad Waqas Qaisar
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 7-14, 2023; DOI: 10.55708/js0212002
Abstract: Plastics are routinely used in the packaging of materials as well as in industrial production. However, once in the environment, they are non-biodegradable, posing severe threats to the ecosystems. Bioplastic replaces conventional plastic, which is biodegradable due to its biological origin and does not affect environment. Sawdust is a very important agro-waste screened as a… Read More

(This article belongs to the Section Biotechnology and Applied Microbiology (BAM))

by Kitty Kioskli, Spyridon Papastergiou and Theofanis Fotis
Journal of Engineering Research and Sciences, Volume 2, Issue 9, Page # 1-11, 2023; DOI: 10.55708/js0209001
Abstract: Non-communicable diseases (NCDs) present complex challenges in patient care. Artificial Intelligence (AI) offers transformative potential, but its implementation requires addressing key issues. This study proposes a swarm intelligence-inspired clinical validation framework for NCDs, promoting openness, trustworthiness, and continuous self-validation. The framework creates a collaborative environment, connecting healthcare entities, patients, caregivers, and professionals. The swarm-based approach… Read More

(This article belongs to the Special Issue on SP3 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2023) and the Section Medical Informatics (MDI))

by Igor Sergeyev
Journal of Engineering Research and Sciences, Volume 2, Issue 7, Page # 1-9, 2023; DOI: 10.55708/js0207001
Abstract: Fast AC voltage RMS measuring converter with iterative additive error correction which implements an iteratively integrating conversion method is considered. The use of this converter allows a high conversion rate to be achieved. Error analysis of this converter іs described. Bаsіc equations fоr the determing the convergence condition for the error correction process and the… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Henry Ogbemudia Omoregbee, Mabel Usunobun Olanipekun and Bright Aghogho Edward
Journal of Engineering Research and Sciences, Volume 2, Issue 6, Page # 1-9, 2023; DOI: 10.55708/js0206001
Abstract: Neural Network regression (NNR) is considered more effective as compared to multiple neural networks model readily available in Azure to evaluate the Remaining Useful Life (RUL) of bearing in this work because it performs better than other models when used and was demonstrated as a non-programing technique for analyzing enormous data without the use of… Read More

(This article belongs to the Special Issue on SP3 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2023) and the Section Artificial Intelligence – Computer Science (AIC))

by Elisa Benetti and Gianluca Mazzini
Journal of Engineering Research and Sciences, Volume 2, Issue 3, Page # 16-30, 2023; DOI: 10.55708/js0203002
Abstract: Computational thinking is now featured in many school curricula around the world. It is in fact defined as the "new English", emphasizing its universally recognized indispensability. Despite this, the subject is almost never addressed until primary school where, however, hours dedicated to it are often too limited. Our first training proposal, including basic coding concepts… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Education and Educational Research (EER))

by Ricardo Borges Dos Santos, Rodrigo Palucci Pantoni and Nunzio Marco Torrisi
Journal of Engineering Research and Sciences, Volume 2, Issue 2, Page # 15-23, 2023; DOI: 10.55708/js0202003
Abstract: The aim of this research is to suggest and analyze a framework to give universal publicity to food properties certificates from any certification authorities. The focus is the certification of agro product instances, i.e. unique for every single harvest, using smart contracts and blockchain non fungible tokens minted by third-party authorities. The development and testing… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Information Systems – Computer Science (ISC))

by Bo Bo Oo
Journal of Engineering Research and Sciences, Volume 2, Issue 2, Page # 8-14, 2023; DOI: 10.55708/js0202002
Abstract: Digital multimedia assets, including photographs, movies, and audio files, have become a staple of contemporary life. Steganography is a method for undetectable information concealment in these files. One can communicate messages to another by modifying multimedia signals so that a human would be unable to tell the difference between the original signal and the altered… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Information Systems – Computer Science (ISC))

by Javier Urquizo, Diover Bonilla, Francisco Rivera and Rommel Chang
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 1-12, 2023; DOI: 10.55708/js0201001
Abstract: This research is about tuning the automatic generator control (AGC) unit within the National Transmission System (NTG) and is intended to provide a set of key insights into problems related to generator control systems oscillations and the possible available solutions. The case study is the Baba Hydroelectric Power Plant in Ecuador. The aim is to… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Electrical Engineering (ELE))

by Joel Ogunyemi, Olawale Ezekiel Fagbuaro and Henry Sunday Okeke
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 21-27, 2022; DOI: 10.55708/js0112004
Abstract: Pulse width modulated (PWM) inverter has applications in many areas as it offers control of voltage, frequency, and harmonic in one power stage. In the practical design of three-phase inverter circuits, a proper understanding of the operations and peculiarities of the specific model to be built is necessary. Most often, perhaps due to different models… Read More

(This article belongs to the Section Electrical Engineering (ELE))

by Sooyeon Choi and Richard A. Feinberg
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 1-6, 2022; DOI: 10.55708/js0112001
Abstract: Cryptocurrency is gaining worldwide recognition. This research examines the role of personality and psychological factors in consumers’ cryptocurrency adoption behavior. 452 samples are collected from U.S consumers and the data are analyzed by PLS-SEM. The findings reveal that consumer innovativeness has a positive influence on the intention to use cryptocurrency and its impact is partially… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Ergonomics (ERG))

by Juhi Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 13-18, 2022; DOI: 10.55708/js0110003
Abstract: OFDM is one of the important modulation techniques for wireless communication which is the advanced version of FDM. Now-a-days congestion networking is growing like AI, IoT, 5G etc. so there is a need of high data rate with low BER. For such a network there is requirement of high-speed secured data transmission that is multicarrier… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Mange Karan Ratanbhai
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 1-4, 2022; DOI: 10.55708/js0110001
Abstract: The paper aims to highlight the key frameworks of Dr. B.R. Ambedkar, his thoughts, philosophies, and goals behind the framing of the Indian constitution. Based on different theories and philosophies, the concept of the reservation system adopted by the Indian Constitution, and its relevance in today’s scenario is being portrayed. Dr. Ambedkar’s idea of a… Read More

(This article belongs to the Section Law (LAW))

by Shukhrat Egamov, Abduvali Khidirov and Mirzokulov Khotam Bakhtiyor Ugli
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 19-26, 2022; DOI: 10.55708/js0108003
Abstract: The results of studying the possibilities of the properties of magneto-optical qubits obtained using the Faraday rotation effect are presented. Waveguide geometries have been chosen for the design of various information processing and transmission devices based on new concepts creating key elements of logic gates, with new architectures applicable to different fields of science and… Read More

(This article belongs to the Section Applied Physics (APY))

by Sergey Tarima and Zhanna Zenkova
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 12-18, 2022; DOI: 10.55708/js0108002
Abstract: A product’s life cycle hinges on its sales. Product sales are determined by a combination of market demand, industrial production, logistics, supply chains, labor hours, and countless other factors. Business-specific questions about sales are often formalized into questions relating to specific quantities in sales data. Statistical estimation of these quantities of interest is crucial but… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Statistics & Probability (STP))

by Mengxing Zhang, Youming Hua, Chunbin Chen, Chenkun Chu and Xiuli Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 44-47, 2022; DOI: 10.55708/js0107007
Abstract: Optical fiber is used in various fields because of its advantages of large-capacity communication, long-distance transmission, low signal crosstalk, good confidentiality, anti-electromagnetic interference, good transmission quality, small size, light weight, and long life. In this paper, the latest research progress of optical fiber sensing technology and its application and development in the field of rotating… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Instruments and Instrumentation (INN))