by Supriya Yadav and Gareth Howells
Journal of Engineering Research and Sciences, Volume 2, Issue 10, Page # 1-8, 2023; DOI: 10.55708/js0210001
Abstract: In the digital era, data security in files, databases, accounts, and networks is of utmost importance. Due to the sensitive, private, or protected information they contain, databases are a common target for cyber attacks. To assess threats to data and lower the risk involved with data processing and storage, data security is crucial. Therefore, it… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2023 and the Section Software Engineering – Computer Science (SEC))

by Gian Paolo Jesi and Andrea Odorizzi
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 1-13, 2023; DOI: 10.55708/js0204001
Abstract: This paper focuses on the genesis and evolution of our specific Company tool. It is aimed to tackle the problem of verifying the health status and availability of residual bandwidth between any node over the Lepida ScpA broadband network. In fact, there must be a correspondence between active contractual obligations signed by local network operators… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Telecommunications (TEL))

by Elisa Benetti and Gianluca Mazzini
Journal of Engineering Research and Sciences, Volume 2, Issue 3, Page # 16-30, 2023; DOI: 10.55708/js0203002
Abstract: Computational thinking is now featured in many school curricula around the world. It is in fact defined as the "new English", emphasizing its universally recognized indispensability. Despite this, the subject is almost never addressed until primary school where, however, hours dedicated to it are often too limited. Our first training proposal, including basic coding concepts… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Education and Educational Research (EER))

by Ricardo Borges Dos Santos, Rodrigo Palucci Pantoni and Nunzio Marco Torrisi
Journal of Engineering Research and Sciences, Volume 2, Issue 2, Page # 15-23, 2023; DOI: 10.55708/js0202003
Abstract: The aim of this research is to suggest and analyze a framework to give universal publicity to food properties certificates from any certification authorities. The focus is the certification of agro product instances, i.e. unique for every single harvest, using smart contracts and blockchain non fungible tokens minted by third-party authorities. The development and testing… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Information Systems – Computer Science (ISC))

by Misha Khan, Mufliha Ibrahim, Muhammad Saad Shabbir, Muhammad Huzaifa Tofique, Muhammad Naheel Khalili, Muhammad Asad, Muhammad Ahmed, Muhammad Haroon and Saima Zainab
Journal of Engineering Research and Sciences, Volume 2, Issue 2, Page # 1-7, 2023; DOI: 10.55708/js0202001
Abstract: Pandemics always have a significant effect on the physical, mental, and financial status of people in general. With new variants of coronavirus emerging now and then, it is difficult to process the sudden changes and new healthcare implementations for all individuals. In this situation, our objective was to assess the mental-wellbeing of medical students and… Read More

(This article belongs to the Section Psychology (PYL))

by Javier Urquizo, Diover Bonilla, Francisco Rivera and Rommel Chang
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 1-12, 2023; DOI: 10.55708/js0201001
Abstract: This research is about tuning the automatic generator control (AGC) unit within the National Transmission System (NTG) and is intended to provide a set of key insights into problems related to generator control systems oscillations and the possible available solutions. The case study is the Baba Hydroelectric Power Plant in Ecuador. The aim is to… Read More

(This article belongs to the Special Issue on Special Issue on Computing, Engineering and Sciences 2023-23 and the Section Electrical Engineering (ELE))

by Fabi Jonathan Kehinde and Akinseinde Olubola Atanda
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 28-37, 2022; DOI: 10.55708/js0112005
Abstract: Project success factors are germane in achieving project objectives by stakeholders. The research investigates the stakeholder’s perception of project success factors for highway project in Nigeria. Therefore, the specific objectives is to identify and assess factor influencing the success of highway project in Nigeria. To achieve the main objective of this paper, two hundred (200)… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Swanand Pachpore and Pradeep Jadhav
Journal of Engineering Research and Sciences, Volume 1, Issue 12, Page # 15-20, 2022; DOI: 10.55708/js0112003
Abstract: Root Canal Treatment (RCT) is one of the most common endodontic clinical procedures performed in the field of dentistry amounting to almost 25 million performed every year. It is thus essential for endodontists to ensure best practices. However, through a recent survey, it has been observed endodontists resort to supplemental methods and protocols during procedures… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Adil Ali Saleem, Kainat Zafar, Muhammad Amjad Raza, Zahid Kareem, Mui-zzud-din, Hafeez Ur Rehman Siddiqui and Sandra Dudley
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 45-55, 2022; DOI: 10.55708/js0110007
Abstract: During recent years, the increase in the ageing population, the ubiquity of chronic diseases in the world, and the development in technologies have resulted in high demand for efficient healthcare systems. Physical anomalies mostly caused by injury, disease, and ageing lead to limit the regular ability of people to move and function. Primary health care… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Chhaya Narvekar and Madhuri Rao
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 19-25, 2022; DOI: 10.55708/js0110004
Abstract: Soil fertility needs to be assessed to develop strategies for long-term agricultural productivity. A study has been undertaken at Shirol tehsil, Kolhapur district, Maharashtra state, India to evaluate the fertility status of soil using nutrient index approach. For the present study PH, organic carbon, and EC were chosen as potential markers of soil quality along… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Agriculture Multidisciplinary (AGM))

by Sergey Tarima and Zhanna Zenkova
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 12-18, 2022; DOI: 10.55708/js0108002
Abstract: A product’s life cycle hinges on its sales. Product sales are determined by a combination of market demand, industrial production, logistics, supply chains, labor hours, and countless other factors. Business-specific questions about sales are often formalized into questions relating to specific quantities in sales data. Statistical estimation of these quantities of interest is crucial but… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Statistics & Probability (STP))

by Chetan Mohanlal Wani, Sachin Ratnakar Deshmukh and Ratnakar Raghunath Ghorpade
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 1-11, 2022; DOI: 10.55708/js0108001
Abstract: Biomedical engineering has become a solution for many biological problems by the application of principles and problem-solving techniques. Pacemakers, artificial bone replacements, 3-D printed organs, and dental replacements are very common examples of an application of engineering in the biomedical field. In medical applications when there is a need for bone replacement in a patient… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Konstantinos Barlas and Petros Stefaneas
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 243-250, 2022; DOI: 10.55708/js0105025
Abstract: Java Script Object Notation (JSON) is an open standard data format that is used widely across the internet data due to its low overhead. While originally created in the early 2000s, it has only gained standard status in 2013 and then again in 2017 with a new version that focused more on security and interoperability.… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Hamza Fahmy, Mohamed Mazouzi, Ayoub Alami Masmoudi and Tamasna El Mehdi
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 223-230, 2022; DOI: 10.55708/js0105023
Abstract: Because firms are considering the influence of their operations on the environment, the green supply chain has become a crucial indication of corporate performance. The issues here necessitate both competent management and a fresh, innovative strategy for cost reduction, productivity enhancement, and natural resource protection. We shall try to understand the Barriers of Green Supply… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Green and Sustainable Science & Technology (GSS))

by Philip Marothi Lemekwane and Nkqubela Ruxwana
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 213-222, 2022; DOI: 10.55708/js0105022
Abstract: To determine what needs to be done, organisations throughout the world need the capability to find out quickly, what is happening and why it happened. Therefore, having the intelligence to make informed decisions at the right time and place is the key to success in today's dynamic environment. As mobile systems become increasingly available, more… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Pamela Ramsami and Robert Tat Fung Ah King
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 186-197, 2022; DOI: 10.55708/js0105020
Abstract: The increased penetration of renewable energy sources in the distribution system affects the stability and efficiency of the system. To account for the intermittent nature of these sources, distribution network reconfiguration and the integration of custom power devices are important. This paper aims to identify the optimum location of photovoltaic systems and unified power quality… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Amougou Ngoumou and Marcel Fouda Ndjodo
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 179-185, 2022; DOI: 10.55708/js0105019
Abstract: Evolution in Software Product Line (SPL) is claimed when there are changes in the requirements, product structure or the technology being used. Currently, many different approaches have been proposed on how to manage SPL assets and some also address how evolution affects these assets. However, the usefulness, effectiveness and applicability of these approaches are unclear,… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Hocine Merzouki, Nada Matta, Hassan Atifi and Francois Rauscher
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 167-178, 2022; DOI: 10.55708/js0105018
Abstract: The notion of competence is multidimensional and polysemic. Several definitions of this notion are present in the literature according to disciplines such as industry, sociology, management, psychology, etc. It often refers to the experience, knowledge, abilities, skills, behaviors, and attitudes that allow valuable action in a workplace. Beyond its intrinsic value for the individual, competence… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Jigneshkumar Patel and Vijay Sood
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 148-160, 2022; DOI: 10.55708/js0104017
Abstract: Cascaded H-bridge multilevel inverters (CHB-MLI) are employed in a variety of medium/high power applications. These inverters are known to inject unwanted harmonics into the grid, which negatively affects the grid and connected loads. CHB-MLI topology can reduce many of these harmonics by producing multiple output voltage levels and improves the fundamental component using a suitable… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Abdulhalim Musa Abubakar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 170-187, 2022; DOI: 10.55708/js0103018
Abstract: This work aims at providing factual details necessary for the utilization of diverse feedstock for anaerobic digestion (AD) to produce biogas using either conventional or non-conventional types of digesters. This is necessary as different substrates had peculiar merits or potentials of biogas production due to their unique characteristics. Selection of right feedstock is usually based… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Joohoon Je and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 148-152, 2022; DOI: 10.55708/js0103015
Abstract: The center of gravity of a three-dimensional object found through an experimental method can be made easier and faster than calculating the movement manually to make it look more natural in graphic computer images. In addition, in various sports such as skating, the score can be increased by appropriately moving the position of the center… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Multidisciplinary – Materials Science (MLM))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Kaibi Zhang, Yanyan Wang and Hongchun Qu
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 81-97, 2022; DOI: 10.55708/js0103009
Abstract: In a dynamic and complex bearing operating environment, current auto-encoder-based deep models for fault diagnosis are having difficulties in adaptation, which usually leads to a decline in accuracy. Besides, the opaqueness of the decision process by such deep models might reduce the reliability of the diagnostic results, which is not conducive to the subsequent optimization… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Artificial Intelligence – Computer Science (AIC))

by Ceyda Akıllı, İmam Bakır Arabacı and Engin Kırçıl
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 19-27, 2022; DOI: 10.55708/js0103003
Abstract: Vocational and technical education institutions help to train individuals in a well-equipped manner, increase their employability level, and provide workforce in areas that countries need. Vocational and technical education is of great importance in terms of ensuring the development of countries at the national and international level, training qualified intermediate staff and increasing employment opportunities.… Read More

(This article belongs to the Section Education and Educational Research (EER))