by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 102-108, 2022; DOI: 10.55708/js0105011
Abstract: The derivation of the transfer function of the output filter of the electromagnetic compatibility of the inverter, loaded by RL-branch, proposed, which differs by taking into account the presence of resistances in the longitudinal and transverse branches of the L-shaped filter. The form of recording the voltage transfer function of an electrical transformer loaded by… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Electrical Engineering (ELE))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Construction and Building Technology (CBT))

by Giovani Manuel Pitra and Kameswara Subrahmanya Sastry Musti
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 52-60, 2022; DOI: 10.55708/js0105006
Abstract: When higher quantities of solar energy is injected into power grid, then it is likely to result in what is known as “Duck curve phenomena”.  The net load under this phenomenon is negative and thus energy generation needs to be curtailed during the peak hours and also a part of the load during off-peak hours… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Electrical Engineering (ELE))

by Muhammad Tanveer Riaz, Umar Saeed, Saba Waseem, Sidra Riaz and Eman Manzoor Ahmed
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 34-40, 2022; DOI: 10.55708/js0105004
Abstract: The power balancing is the issue that creates when voltage fluctuations occur in the DC microgrid. In order to compensate for the DC bus voltages in the DC microgrid, the energy storage system is used. This system absorbs or releases the power to make the DC bus voltages is stable. In this research, a bidirectional… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Electrical Engineering (ELE))

by Joshua Ogbebor, Xiangyu Meng and Xihai Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 25-33, 2022; DOI: 10.55708/js0105003
Abstract: This paper outlines a method for obtaining the optimal control policy for an autonomous vehicle appro med that traffic signal phase and timing information can be made available to the autonomous vehicle as the vehicle approaches the traffic signal. Constraints on the vehicle’s speed and acceleration are considered and a microscopic fuel consumption model is… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Automation and Control Systems (ACS))

by Vijay Kumar, Muskan Khajuria and Anshu Singh
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 17-24, 2022; DOI: 10.55708/js0105002
Abstract: Depression is a mental condition that can have serious negative effects on an individual’s thoughts and nd health problems that could lead to grave heart diseases. Depression detection has become necessary in community dwellers considering the lifestyle being followed. Here we use NHANES dataset to compare the performance of various machine learning algorithms in depression… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Viacheslav Sergeevich Okunev
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 01-16, 2022; DOI: 10.55708/js0105001
Abstract: The main goal of the work was the development of software and codes for the design of new generation nuclear reactors. The problem is solved by the example of fast reactors with a liquid metal coolant. The problem is solved within the framework of system analysis methods and operations drawing methods. Three groups of methods… Read More

(This article belongs to the Section Nuclear Science and Technology (NST))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Electronic Engineering (EEE))

by Yash Patil, Shivraj Patil, Suhas Gawade, Vaishnav Shinde and Samidha Jawade
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 62-67, 2022; DOI: 10.55708/js0104008
Abstract: Belt conveyor system is mostly used in industries for transportation of raw materials and finished products. This paper includes study of detailed design procedure and analysis of flat belt conveyor components for light duty applications. Belt conveyors used for segregation of defective products up to 2 kg maximum load whose conveyor capacity is 2 TPH… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Chris Nikolopoulos and Ryan Koralik
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 48-53, 2022; DOI: 10.55708/js0104006
Abstract: Prediction of plant growth and yield is one of the essential tasks that enables growers of food and agricultural products to effectively manage their crops. In this paper, a hybrid evolutionary/fuzzy machine learning approach is introduced where a genetic algorithm is deployed to learn the optimum membership functions of relevant fuzzy sets and a knowledge… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Festus Chukwudi Onyeka, Chidobere David Nwa-David and Thompson Edozie Okeke
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 28-37, 2022; DOI: 10.55708/js0104004
Abstract: In this paper, a polynomial displacement function is developed to evaluate the stability of rectangular thick plate that is freely supported at the third edge and other three edges simply supported (SSFS). Employing three-dimensional (3-D) constitutive relations which consist of entire stress components, the functional for total potential energy was obtained. The governing equations plate… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Waqas Qaisar, Muhammad Tanveer Riaz, Abdul Basit, Yasir Naseem and Zohaib Nazir
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 153-153, 2022; DOI: 10.55708/js0103016
Abstract: The disinfecting mobile robot with omnidirectional movement is a vision-capable robot that uses image processing to follow a dedicated path regardless of the change in direction required and uses Ultraviolet rays from the UV light tubes to disinfect everything in its path and disinfect the entire room. The basic premise of the project in this… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Robotics (ROB))

by Abdulhalim Musa Abubakar, Bello Iliyasu and Zakiyyu Muhammad Sarkinbaka
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 133-147, 2022; DOI: 10.55708/js0103014
Abstract: It is pertinent to highlight areas POLYMATH software is useful for chemical engineering analysis. Its applications had been demonstrated in this paper using 10 Problem Set, in areas that includes transport phenomena, heat transfer, reaction, and bioreaction kinetics to solve differential equations, nonlinear equations, simultaneous linear equations, graphical representation and regression problems arising in these… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Saba Kheirinejad, Noushin Riahi and Reza Azmi
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 68-80, 2022; DOI: 10.55708/js0103008
Abstract: Lately, traffic panel detection has been engrossed by academia and industry. This study proposes a new categorization method for traffic panels. The traffic panels are classified into three classes: symbol-based, text-based, and supplementary/additional traffic panels. Although few types of research have investigated text-based traffic panels, this type is considered in detail in this study. However,… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Hai-Yen -Tran, Trung-Minh Bui, Thi-Loan Pham and Van-Hung Le
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 59-67, 2022; DOI: 10.55708/js0103007
Abstract: 2D HumanPose Estimation (2D-HPE) has been widely applied in many practical applications in life su ction, human-robot interaction, using Convolutional Neural Networks (CNNs), which has achieved many good results. In particular, the 2D-HPE results are intermediate in the 3D Human Pose Estimation (3D-HPE) process. In this paper, we perform a study to compare the results… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Abhinav Vinod Deshpande
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 28-38, 2022; DOI: 10.55708/js0103004
Abstract: In this study paper, a comparative analysis of various image enhancements in local domain techniques was made based on three-dimensional image quality statistics namely Mean Squared Error (MSE), Peak Signal to Noise Ratio (PSNR) and Image Quality Model (SSIM) to determine image quality. especially among them so that the process of image enhancement in the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Information Systems – Computer Science (ISC))

by Vijay Kumar, Jai Singh Malhotra, Saurav Sharma and Parth Bhardwaj
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 09-18, 2022; DOI: 10.55708/js0103002
Abstract: Information about soil properties help the farmers to do effective and efficient farming, and yield mo . An attempt has been made in this paper to predict the soil properties using machine learning approaches. The main properties of soil prediction are Calcium, Phosphorus, pH, Soil Organic Carbon, and Sand. These properties greatly affect the production… Read More

(This article belongs to the Section Environmental Engineering (EVE))

by Habib M. Hussien, Konstantinos Katzis, Luzango P. Mfupe and Ephrem T. Bekele
Journal of Engineering Research and Sciences, Volume 1, Issue 2, Page # 24-32, 2022; DOI: 10.55708/js0102003
Abstract: As with previous generations of mobile cellular networks, rural regions are projected to face financial and technological challenges in deploying 5G services. At the time, researchers all around the world are investigating the feasibility of utilizing TV White Spaces (TVWS). TVWS is an underutilized/unused section of television spectrum that might be used as a low-cost… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Telecommunications (TEL))

by Wajih Abdallah, Sami Mnasri and Thierry Val
Journal of Engineering Research and Sciences, Volume 1, Issue 2, Page # 10-23, 2022; DOI: 10.55708/js0102002
Abstract: IoT data collection networks have recently become one of the important research areas due to their fundamental role and wide application in many domains. The establishment of networks of objects is based essentially on the deployment of connected objects to process the collected data and transmit them to the various locations. Subsequently, a large number… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Kaana Asemave and Agube Solomon Shiebee
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 51-55, 2022; DOI: 10.55708/js0101005
Abstract: The work considered comparative analysis of CRI (Curcuma longa rhizome extract indicator) and TLI (Tectona grandis leaves extract indicator) as green indicators versus some synthetic indicators in acid – base titration involving HCl-NaOH, CH3COOH-NaOH, CH3COOH -NH4OH, and HCl-NH4OH. The codes used were SA (strong acid), SB (strong base), WA (weak acid) and WB (weak base).… Read More

(This article belongs to the Section Applied Chemistry (APC))

by Ogirima Sanni Abubakar Omuya and Arulogun Oladiran Tayo
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 39-50, 2022; DOI: 10.55708/js0101004
Abstract: Telemedicine is using telecommunications and IT and other ICT tools to widen healthcare services to remote rural areas. ICT global coverage, multicasting ability, and the high capacity of satellites in GEO can be served as an instrument to widen and enhance the high quality of healthcare service to remote rural areas. Long end-to-end latency could… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Frederick Ojiemhende Ehiagwina, Nurudeen Ajibola Iromini, Ikeola Suhurat Olatinwo, Kabirat Raheem and Khadijat Mustapha
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 19-38, 2022; DOI: 10.55708/js0101003
Abstract: Centralized file-sharing networks have low reliability, scalability issues, and possess a single point of failure, thus making peer-to-peer (P2P) networks an attractive alternative since they are mostly anonymous, autonomous, cooperative, and decentralized. Although, there are review articles on P2P overlay networks and technologies, however, other aspects such as hybrid P2P networks, modelling of P2P, trust… Read More

(This article belongs to the Section Multidisciplinary – Sciences (MLS))

by Onur Eker, Hakan Cevikalp and Hasan Saribas
Journal of Engineering Research and Sciences, Volume 1, Issue 1, Page # 01-09, 2022; DOI: 10.55708/js0101001
Abstract: Fast and accurate observation of an area in disaster scenarios such as earthquake, flood and avalanche is crucial for first aid teams. Digital surface models, orthomosaics and object detection algorithms can play an important role for rapid decision making and response in such scenarios. In recent years, Unmanned Aerial Vehicles (UAVs) have become increasingly popular… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Automation and Control Systems (ACS))