by Laurence Banda
Journal of Engineering Research and Sciences, Volume 4, Issue 2, Page # 1-10, 2025; DOI: 10.55708/js0402001
Abstract: The fierce race among mobile network operators (MNOs) to roll out fifth-generation (5G) networks has intensified. One of the potential markets where 5G deployment has increased tremendously is Sub-Saharan Africa. This is primarily due to rapid economic growth and the new opportunities that 5G networks and the associated technologies are expected to offer through sustainable… Read More

(This article belongs to the Section Operations Research and Management Science (ORM))

by Eslam Deef-Allah, Korrenn Broaddus and Magdy Abdelrahman
Journal of Engineering Research and Sciences, Volume 3, Issue 11, Page # 41-59, 2024; DOI: 10.55708/js0311004
Abstract: For safe driving, the proper level of pavement friction must be maintained. The capacity of a pavement surface to offer friction to vehicles during cornering maneuvers or crucial braking is improved by high friction surface treatment. Calcined Bauxite is the most often utilized high friction aggregate. Calcined Bauxite, a byproduct, was the priciest aggregate relative… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Tefo Gordon Sekgweleo and Phathutshedzo Makovhololo
Journal of Engineering Research and Sciences, Volume 3, Issue 12, Page # 1-13, 2024; DOI: 10.55708/js0312001
Abstract: Developing software is a huge job, which is why digital product teams rely on the software development life cycle (SDLC). SDLC is a critical framework for digital product teams, and software testing is its most vital component. Testing evaluates software components to identify properties of interest, detect defects, and ensure alignment with requirements. If not… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Diptadip Maiti, Madhuchhanda Basak and Debashis Das
Journal of Engineering Research and Sciences, Volume 3, Issue 9, Page # 26-60, 2024; DOI: 10.55708/js0309003
Abstract: As documented in recent research, this review offers a thorough examination of the intricate subject of fingerprint authentication, including a wide range of issues and applications. Addressing problems like non-linear deformations and enhancing picture quality, which are frequently reduced by sophisticated improvement and alignment techniques are important components of fingerprint image authentication. Countering security concerns… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Cybernetics – Computer Science (CYC))

by Mithun Dutta, Dhonita Tripura and Jugal Krishna Das
Journal of Engineering Research and Sciences, Volume 3, Issue 7, Page # 53-58, 2024; DOI: 10.55708/js0307005
Abstract: Acquiring tenable text detection and recognition outcomes for natural scene images as well as for digital frames is very challenging emulating task. This research approaches a method of text identification for the English language which has advanced significantly, there are particular difficulties when applying these methods to languages such as Bengali because of variations in… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Artificial Intelligence – Computer Science (AIC))

by Liao Jinzhi Lois, Liu Qing, Quan Jing, Ye Qing, Zhang Xi, Hua Younan and Li Xiaomin
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 1-5, 2024; DOI: 10.55708/js0301001
Abstract: A land grid array (LGA) is an integrated circuit design with a grid of contacts connected to other components of a printed circuit board. LGA is used for various high-speed and high-frequency applications due to its small terminal parasitic inductance. However, LGA packages are non-hermetic, as most the components of the LGA, like epoxy molding… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Shukhrat Egamov, Abduvali Khidirov and Mirzokulov Khotam Bakhtiyor Ugli
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 19-26, 2022; DOI: 10.55708/js0108003
Abstract: The results of studying the possibilities of the properties of magneto-optical qubits obtained using the Faraday rotation effect are presented. Waveguide geometries have been chosen for the design of various information processing and transmission devices based on new concepts creating key elements of logic gates, with new architectures applicable to different fields of science and… Read More

(This article belongs to the Section Applied Physics (APY))

by Mengxing Zhang, Youming Hua, Chunbin Chen, Chenkun Chu and Xiuli Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 44-47, 2022; DOI: 10.55708/js0107007
Abstract: Optical fiber is used in various fields because of its advantages of large-capacity communication, long-distance transmission, low signal crosstalk, good confidentiality, anti-electromagnetic interference, good transmission quality, small size, light weight, and long life. In this paper, the latest research progress of optical fiber sensing technology and its application and development in the field of rotating… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Instruments and Instrumentation (INN))

by Amit Moza, Virendra Kumar Paul and Sushil Kumar Solanki
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 198-212, 2022; DOI: 10.55708/js0105021
Abstract: Evaluating complexity, in order to manage it effectively, has been stressed by many researchers as one of the key areas of project management. This, as literature shows, has been done using different methodologies and assessing it from different perspectives resulting in measures that differ in their characteristics, their application, and their relevance with respect to… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Amougou Ngoumou and Marcel Fouda Ndjodo
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 179-185, 2022; DOI: 10.55708/js0105019
Abstract: Evolution in Software Product Line (SPL) is claimed when there are changes in the requirements, product structure or the technology being used. Currently, many different approaches have been proposed on how to manage SPL assets and some also address how evolution affects these assets. However, the usefulness, effectiveness and applicability of these approaches are unclear,… Read More

(This article belongs to the Section Software Engineering – Computer Science (SEC))

by Hocine Merzouki, Nada Matta, Hassan Atifi and Francois Rauscher
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 167-178, 2022; DOI: 10.55708/js0105018
Abstract: The notion of competence is multidimensional and polysemic. Several definitions of this notion are present in the literature according to disciplines such as industry, sociology, management, psychology, etc. It often refers to the experience, knowledge, abilities, skills, behaviors, and attitudes that allow valuable action in a workplace. Beyond its intrinsic value for the individual, competence… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Rishabh Rastogi, Sushil Kumar Solanki and Virendra Kumar Paul
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 71-78, 2022; DOI: 10.55708/js0105008
Abstract: Across various barriers pertaining to prefabricated building construction projects, a major barrier identified by the literature was integration of various components of prefabricated building project supply chain network, including the material and human resource supply chains. The literature suggests a need of exploring this barrier of supply chain integration into its various sub factors/challenges (termed… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Mechanics (MEC))

by Jigneshkumar Patel and Vijay Sood
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 148-160, 2022; DOI: 10.55708/js0104017
Abstract: Cascaded H-bridge multilevel inverters (CHB-MLI) are employed in a variety of medium/high power applications. These inverters are known to inject unwanted harmonics into the grid, which negatively affects the grid and connected loads. CHB-MLI topology can reduce many of these harmonics by producing multiple output voltage levels and improves the fundamental component using a suitable… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))

by Yash Patil, Shivraj Patil, Suhas Gawade, Vaishnav Shinde and Samidha Jawade
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 62-67, 2022; DOI: 10.55708/js0104008
Abstract: Belt conveyor system is mostly used in industries for transportation of raw materials and finished products. This paper includes study of detailed design procedure and analysis of flat belt conveyor components for light duty applications. Belt conveyors used for segregation of defective products up to 2 kg maximum load whose conveyor capacity is 2 TPH… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Waqas Qaisar, Muhammad Tanveer Riaz, Abdul Basit, Yasir Naseem and Zohaib Nazir
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 153-153, 2022; DOI: 10.55708/js0103016
Abstract: The disinfecting mobile robot with omnidirectional movement is a vision-capable robot that uses image processing to follow a dedicated path regardless of the change in direction required and uses Ultraviolet rays from the UV light tubes to disinfect everything in its path and disinfect the entire room. The basic premise of the project in this… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Robotics (ROB))

by Kaibi Zhang, Yanyan Wang and Hongchun Qu
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 81-97, 2022; DOI: 10.55708/js0103009
Abstract: In a dynamic and complex bearing operating environment, current auto-encoder-based deep models for fault diagnosis are having difficulties in adaptation, which usually leads to a decline in accuracy. Besides, the opaqueness of the decision process by such deep models might reduce the reliability of the diagnostic results, which is not conducive to the subsequent optimization… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Artificial Intelligence – Computer Science (AIC))

by Michael Vesnik
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 52-58, 2022; DOI: 10.55708/js0103006
Abstract: The recently proposed method of fundamental components is employed to develop a technique for obtaining a heuristic solution to the problem of diffraction on a half-plane with non-ideal boundary conditions. The difference between the new method and traditional heuristic approaches, such as the geometric theory of diffraction and the method of edge waves, is the… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Applied Mathematics (APM))

by Abinash Rath and Rumpa Saha
Journal of Engineering Research and Sciences, Volume 1, Issue 2, Page # 01-09, 2022; DOI: 10.55708/js0102001
Abstract: Power quality monitoring is one of the most important aspects of designing of compensators and other FACTS devices used in the power system. This paper aims at finding the power quality indices from the voltage and current samples of a harmonic polluted grid, by using a newly proposed sample manipulating technique. Here, all the harmonic… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))