by Seoryeong Choi and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 36-44, 2022; DOI: 10.55708/js0110006
Abstract: SiC ceramics are excellent materials applied at high temperatures because of their lightweight, excellent high-temperature strength, and high thermal shock resistance. For better engineering properties, we made SiC with fractal lattices. Stress-strain behavior and modulus changes from room temperature to 1,250 oC were analyzed using LAMMPS S/W, a molecular dynamics program. As a result of… Read More

(This article belongs to the Section Applied Physics (APY))

by Karnam Shri Harsh and Surbhi Razdan
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 29-37, 2022; DOI: 10.55708/js0107005
Abstract: The present paper reviews an air spring, its types and construction, manufacturing process, testing and process of FEA analysis. Air spring is of three types - Sleeve-type air spring (SAS), Rolling-Lobe Air-Spring (RLAS), and Convoluted Air Spring (CAS). Spring stiffness is the main factor during manufacturing; to obtain it by FEA analysis and experimentation process… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Construction and Building Technology (CBT))

by Onyeka Festus Chukwudi, Okeke Thompson Edozie and Nwa-David Chidobere
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 106-115, 2022; DOI: 10.55708/js0103011
Abstract: In this study, exact trigonometric displacement function was used to solve the buckling problem of a three-dimensional (3-D) rectangular plate that is clamped at the first-three edges and the other remaining edge simply supported (CCCS) under uniaxial compressive load. Employing 3-D constitutive relations which consist of entire components, the functional for total potential energy was… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Ishfaq Hussain
Journal of Engineering Research and Sciences, Volume 4, Issue 9, Page # 1-11, 2025; DOI: 10.55708/js0409001
Abstract: In response to the global imperative for sustainable solutions, this study investigates the finite element analysis (FEA) and optimization of bamboo as a material for bicycle frames. As eco-friendly transportation gains importance, bicycles are recognized as a key component of sustainable mobility. This research utilizes FEA to thoroughly examine the structural performance of bamboo frames,… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Giacomo Bucci and Imad Zaza
Journal of Engineering Research and Sciences, Volume 3, Issue 11, Page # 1-23, 2024; DOI: 10.55708/js0311001
Abstract: This paper is an extended version of that presented at the conference Histelcon 2021 (IEEE). It provides a deeper illustration of the elements of the exhibit under development at the Faculty of Engineering at the University of Florence (Italy). The paper presented at Histelcon 2021 focussed on the birth of microprocessors, on the 8086, on… Read More

(This article belongs to the Section Information Systems – Computer Science (ISC))

by Anam Javaid, Sumaira Aslam, Hira Qaisar, Farhat Batool, Rimsha Javed and Muhammad Waqas Qaisar
Journal of Engineering Research and Sciences, Volume 2, Issue 12, Page # 7-14, 2023; DOI: 10.55708/js0212002
Abstract: Plastics are routinely used in the packaging of materials as well as in industrial production. However, once in the environment, they are non-biodegradable, posing severe threats to the ecosystems. Bioplastic replaces conventional plastic, which is biodegradable due to its biological origin and does not affect environment. Sawdust is a very important agro-waste screened as a… Read More

(This article belongs to the Section Biotechnology and Applied Microbiology (BAM))

by Chetan Mohanlal Wani, Sachin Ratnakar Deshmukh and Ratnakar Raghunath Ghorpade
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 1-11, 2022; DOI: 10.55708/js0108001
Abstract: Biomedical engineering has become a solution for many biological problems by the application of principles and problem-solving techniques. Pacemakers, artificial bone replacements, 3-D printed organs, and dental replacements are very common examples of an application of engineering in the biomedical field. In medical applications when there is a need for bone replacement in a patient… Read More

(This article belongs to the Section Biomedical Engineering (BIE))

by Mengxing Zhang, Youming Hua, Chunbin Chen, Chenkun Chu and Xiuli Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 7, Page # 44-47, 2022; DOI: 10.55708/js0107007
Abstract: Optical fiber is used in various fields because of its advantages of large-capacity communication, long-distance transmission, low signal crosstalk, good confidentiality, anti-electromagnetic interference, good transmission quality, small size, light weight, and long life. In this paper, the latest research progress of optical fiber sensing technology and its application and development in the field of rotating… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Instruments and Instrumentation (INN))

by Charles Darko
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 119-133, 2022; DOI: 10.55708/js0105013
Abstract: Proper use of the Blackboard Learning Management System (LMS) motivates students to engage with their studies but the students within Material Science and Engineering (MSE) often use these LMSs to copy mathematical derivations, scientific information and submit coursework tasks without spending much time interacting with the system. Quantitatively, there is a piece of missing information… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Rishabh Rastogi, Sushil Kumar Solanki and Virendra Kumar Paul
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 71-78, 2022; DOI: 10.55708/js0105008
Abstract: Across various barriers pertaining to prefabricated building construction projects, a major barrier identified by the literature was integration of various components of prefabricated building project supply chain network, including the material and human resource supply chains. The literature suggests a need of exploring this barrier of supply chain integration into its various sub factors/challenges (termed… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology (SI-MSAT 2022) and the Section Mechanics (MEC))

by Viacheslav Sergeevich Okunev
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 01-16, 2022; DOI: 10.55708/js0105001
Abstract: The main goal of the work was the development of software and codes for the design of new generation nuclear reactors. The problem is solved by the example of fast reactors with a liquid metal coolant. The problem is solved within the framework of system analysis methods and operations drawing methods. Three groups of methods… Read More

(This article belongs to the Section Nuclear Science and Technology (NST))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Yash Patil, Shivraj Patil, Suhas Gawade, Vaishnav Shinde and Samidha Jawade
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 62-67, 2022; DOI: 10.55708/js0104008
Abstract: Belt conveyor system is mostly used in industries for transportation of raw materials and finished products. This paper includes study of detailed design procedure and analysis of flat belt conveyor components for light duty applications. Belt conveyors used for segregation of defective products up to 2 kg maximum load whose conveyor capacity is 2 TPH… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Neha Tiwari, Ganesh Kakandikar and Omkar Kulkarni
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 126-132, 2022; DOI: 10.55708/js0103013
Abstract: In terms of manufacturing methods/processes, micro-manufacturing has received a lot of attention around the world. Micro-forming is one of the most widely used micro-manufacturing techniques. The micro forming is based on the properties of materials based on the process of shaping parts and object by mechanical deformation. Many efforts had been focused on micro-forming, in… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Vaishnavi Kohale, Samidha Jawade and Ganesh Kakandikar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 116-125, 2022; DOI: 10.55708/js0103012
Abstract: Additive manufacturing creates 3-dimensional objects by depositing materials layer by layer. Different applications of additive manufacturing were examined to determine future growth possibilities. The current research seeks to discover existing additive manufacturing techniques based on the process mechanisms, evaluate modelling approaches based on modelling methodologies, and identify required studies. A significant number of numerical simulations… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Festus Olusola Eebo, Abidakun Bayode Samuel and Gbenga Moses Olayanju
Journal of Engineering Research and Sciences, Volume 1, Issue 2, Page # 41-49, 2022; DOI: 10.55708/js0102005
Abstract: A foundation study was carried out at a proposed Hostel site for the student of Federal University of Technology Akure, Nigeria with the aim of evaluating the competence of the overburden as foundation materials. Geophysical survey involving Electromagnetic method and magnetic method were conducted in conjunction with geotechnical tests in the study area. Electromagnetics and… Read More

(This article belongs to the Section Geological Engineering (GEE))