by Paul Ngo, Jonathan Sprinkle and Rahul Bhadani
Journal of Engineering Research and Sciences, Volume 1, Issue 10, Page # 5-12, 2022; DOI: 10.55708/js0110002
Abstract: Controller Area Network (CAN) bus data is used on most vehicles today to report and communicate sensor data. However, this data is generally encoded and is not directly interpretable by simply viewing the raw data on the bus. However, it is possible to decode CAN bus data and reverse engineer the encodings by leveraging knowledge… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Shukhrat Egamov, Abduvali Khidirov and Mirzokulov Khotam Bakhtiyor Ugli
Journal of Engineering Research and Sciences, Volume 1, Issue 8, Page # 19-26, 2022; DOI: 10.55708/js0108003
Abstract: The results of studying the possibilities of the properties of magneto-optical qubits obtained using the Faraday rotation effect are presented. Waveguide geometries have been chosen for the design of various information processing and transmission devices based on new concepts creating key elements of logic gates, with new architectures applicable to different fields of science and… Read More

(This article belongs to the Section Applied Physics (APY))

by Yankai Xing, Elkhatib Kamal, Bogdan Marinescu and Florent Xavier
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 251-263, 2022; DOI: 10.55708/js0105026
Abstract: In this paper, for the situation of HVDC inserted in meshed AC power grid, a model-matching robust H∞ static output error feedback controller (RSOFC) and model-matching dynamic decoupled output feedback controller (DDOFC) are proposed to improve the damping of inter-area oscillation modes and maintain robustness to face the effects of different operating points and unstable… Read More

(This article belongs to the Section Automation and Control Systems (ACS))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Sohail Shaikh, Deepak Hujare and Shrikant Yadav
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 134-144, 2022; DOI: 10.55708/js0105014
Abstract: With the dominance of a technical and volatile environment with enormous consumer demands, this study aims to investigate the advancements in quality assurance in the era of Industry 4.0. For better production efficiency, rapid and robust automated quality visual inspection is developing rapidly in product quality control. Deep neural network architecture is built for a… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 102-108, 2022; DOI: 10.55708/js0105011
Abstract: The derivation of the transfer function of the output filter of the electromagnetic compatibility of the inverter, loaded by RL-branch, proposed, which differs by taking into account the presence of resistances in the longitudinal and transverse branches of the L-shaped filter. The form of recording the voltage transfer function of an electrical transformer loaded by… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))

by Yubaraj Gautam, Kazuhiko Sato and Bishnu Prasad Gautam
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 88-101, 2022; DOI: 10.55708/js0105010
Abstract: Software-Defined Networking (SDN) is an emerging Network technology that can augment the data plane with control plane by using programming technique. However, there are a numbers of security challenges which are required to address to achieve secured communication. Flooding attack is one of the most common threats on the internet for the last decades which… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Joshua Ogbebor, Xiangyu Meng and Xihai Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 25-33, 2022; DOI: 10.55708/js0105003
Abstract: This paper outlines a method for obtaining the optimal control policy for an autonomous vehicle appro med that traffic signal phase and timing information can be made available to the autonomous vehicle as the vehicle approaches the traffic signal. Constraints on the vehicle’s speed and acceleration are considered and a microscopic fuel consumption model is… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Automation and Control Systems (ACS))

by Gonzalo Tapia, Rodrigo Salas, Matías Salinas, Carolina Saavedra, Alejandro Veloz, Alexis Arriola, Steren Chabert and Antonio Glaría
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 161-174, 2022; DOI: 10.55708/js0104018
Abstract: Pressure (BP) waveform is a result of the response of the arteries to the blood ejectionproduced by tant indicator of the state of the cardiovascular system. Currently, its measurement is performed invasively in critically ill patients who need a continuous and real time monitoring of their treatment response, however, it is possible to measure the… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Medical Informatics (MDI))

by Abdulhalim Musa Abubakar, Kiman Silas and Mohammed Modu Aji
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 93-118, 2022; DOI: 10.55708/js0104013
Abstract: World search for ways to properly manage rural and urban waste generated on daily basis from domestic and industrial buildings, perhaps leads to the adoption of the anaerobic digestion (AD) systems. The system utilizes microorganisms such as viruses, fungi, helminths, bacteria and protozoa to degrade waste so as to generate useful by-products such as biogas,… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Waqas Qaisar, Muhammad Tanveer Riaz, Abdul Basit, Yasir Naseem and Zohaib Nazir
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 153-153, 2022; DOI: 10.55708/js0103016
Abstract: The disinfecting mobile robot with omnidirectional movement is a vision-capable robot that uses image processing to follow a dedicated path regardless of the change in direction required and uses Ultraviolet rays from the UV light tubes to disinfect everything in its path and disinfect the entire room. The basic premise of the project in this… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Robotics (ROB))

by Ceyda Akıllı, İmam Bakır Arabacı and Engin Kırçıl
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 19-27, 2022; DOI: 10.55708/js0103003
Abstract: Vocational and technical education institutions help to train individuals in a well-equipped manner, increase their employability level, and provide workforce in areas that countries need. Vocational and technical education is of great importance in terms of ensuring the development of countries at the national and international level, training qualified intermediate staff and increasing employment opportunities.… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Aliev Telman Abbas, Guluyev Gambar Agaverdi, Rzayev Asif Haji, Aliyev Yaver Gabil, Rezvan Mahammad Huseyn, Yashin Anton Nikolaevich and Khakimyanov Marat Ilgizovich
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 01-08, 2022; DOI: 10.55708/js0103001
Abstract: The article shows that in the middle and late stages of oil field development, of all mechanized methods, the most common is oil extraction by sucker rod pump units (SRPU). However, due to inefficient management of them, their operating costs are increasing. The article presents the results of improving the efficiency of SRPU due to… Read More

(This article belongs to the Section Energy and Fuels (ENF))