by Charles Darko
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 119-133, 2022; DOI: 10.55708/js0105013
Abstract: Proper use of the Blackboard Learning Management System (LMS) motivates students to engage with their studies but the students within Material Science and Engineering (MSE) often use these LMSs to copy mathematical derivations, scientific information and submit coursework tasks without spending much time interacting with the system. Quantitatively, there is a piece of missing information… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Michael A. Vidalis and Antonios S. Andreatos
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 109-118, 2022; DOI: 10.55708/js0105012
Abstract: The technological revolution in Artificial Intelligence (AI) and Autonomous Robotics is expected to transform societies in ways we cannot even imagine. The way we live, interact, work, and fight wars, will not be like anything witnessed before in human history. This qualitative research paper endeavors to examine the effect of said technological advancements on multiple… Read More

(This article belongs to the Section Ethics (ETH))

by Yubaraj Gautam, Kazuhiko Sato and Bishnu Prasad Gautam
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 88-101, 2022; DOI: 10.55708/js0105010
Abstract: Software-Defined Networking (SDN) is an emerging Network technology that can augment the data plane with control plane by using programming technique. However, there are a numbers of security challenges which are required to address to achieve secured communication. Flooding attack is one of the most common threats on the internet for the last decades which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Risako Fukami and Toshiya Matsui
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 79-87, 2022; DOI: 10.55708/js0105009
Abstract: Brick buildings and structures are often exposed to outdoor condition, and deterioration of the bricks due to salt weathering caused by the surrounding environment has been reported in various parts of Japan. In Japan, not only the preservation of cultural properties but also their utilization is currently being promoted, and the beauty of brick surfaces… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Construction and Building Technology (CBT))

by Rishabh Rastogi, Sushil Kumar Solanki and Virendra Kumar Paul
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 71-78, 2022; DOI: 10.55708/js0105008
Abstract: Across various barriers pertaining to prefabricated building construction projects, a major barrier identified by the literature was integration of various components of prefabricated building project supply chain network, including the material and human resource supply chains. The literature suggests a need of exploring this barrier of supply chain integration into its various sub factors/challenges (termed… Read More

(This article belongs to the Section Construction and Building Technology (CBT))

by Tom Thampy, Emmanuel Gospel Raj Rivington and Rajath Chandrashekar
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 61-70, 2022; DOI: 10.55708/js0105007
Abstract: Proportional solenoid valves are used in various applications that require smooth control of flow or pressure. Manufacturing such valves would involve design of valve component, solenoid core and the coil for specific input and output ratings. Materials for each component of the solenoid valve need to be selected for their magnetic properties, application specific requirements… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Mechanics (MEC))

by Giovani Manuel Pitra and Kameswara Subrahmanya Sastry Musti
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 52-60, 2022; DOI: 10.55708/js0105006
Abstract: When higher quantities of solar energy is injected into power grid, then it is likely to result in what is known as “Duck curve phenomena”.  The net load under this phenomenon is negative and thus energy generation needs to be curtailed during the peak hours and also a part of the load during off-peak hours… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Maryam Imran Sheik Mamode and Tulsi Pawan Fowdur
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 41-51, 2022; DOI: 10.55708/js0105005
Abstract: 5G is the successor to 4G technology and it has enabled a new level of user experience with much greater speeds and much lower latencies. Scheduling is the method of allocating resources for transmission of data. In this paper, three scheduling algorithms have been investigated, namely Proportional Fair, Round Robin and Best CQI. An uplink… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Telecommunications (TEL))

by Muhammad Tanveer Riaz, Umar Saeed, Saba Waseem, Sidra Riaz and Eman Manzoor Ahmed
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 34-40, 2022; DOI: 10.55708/js0105004
Abstract: The power balancing is the issue that creates when voltage fluctuations occur in the DC microgrid. In order to compensate for the DC bus voltages in the DC microgrid, the energy storage system is used. This system absorbs or releases the power to make the DC bus voltages is stable. In this research, a bidirectional… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electrical Engineering (ELE))

by Joshua Ogbebor, Xiangyu Meng and Xihai Zhang
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 25-33, 2022; DOI: 10.55708/js0105003
Abstract: This paper outlines a method for obtaining the optimal control policy for an autonomous vehicle appro med that traffic signal phase and timing information can be made available to the autonomous vehicle as the vehicle approaches the traffic signal. Constraints on the vehicle’s speed and acceleration are considered and a microscopic fuel consumption model is… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Automation and Control Systems (ACS))

by Gonzalo Tapia, Rodrigo Salas, Matías Salinas, Carolina Saavedra, Alejandro Veloz, Alexis Arriola, Steren Chabert and Antonio Glaría
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 161-174, 2022; DOI: 10.55708/js0104018
Abstract: Pressure (BP) waveform is a result of the response of the arteries to the blood ejectionproduced by tant indicator of the state of the cardiovascular system. Currently, its measurement is performed invasively in critically ill patients who need a continuous and real time monitoring of their treatment response, however, it is possible to measure the… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Kiman Silas, Aliyu B. Ngulde and Habiba D. Mohammed
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 137-147, 2022; DOI: 10.55708/js0104016
Abstract: Cadmium (Cd) is known to have adverse effects on the kidney, liver, bones and cardio-pulmonary system, this heavy metal is usually consumed from drinking water with higher Cd acceptable limits. In this study, Activated Carbon (AC) is produced from Date Tree Leaf (DTL) and impregnated with Zinc Oxide catalyst, where an adsorbent (ZnO/DTL) was developed… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Electronic Engineering (EEE))

by Awais Ahmad and Peter Mozelius
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 119-126, 2022; DOI: 10.55708/js0104014
Abstract: The population of older adults globally increased during the last couple of decades. Due to these demographic changes, the need for medical care has also significantly increased. Despite the age-related disabilities and chronic diseases, most older adults prefer independent living in their home environment. Technology-enhanced systems and eHealth applications seem to provide some promising solutions… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Medical Informatics (MDI))

by Abdulhalim Musa Abubakar, Kiman Silas and Mohammed Modu Aji
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 93-118, 2022; DOI: 10.55708/js0104013
Abstract: World search for ways to properly manage rural and urban waste generated on daily basis from domestic and industrial buildings, perhaps leads to the adoption of the anaerobic digestion (AD) systems. The system utilizes microorganisms such as viruses, fungi, helminths, bacteria and protozoa to degrade waste so as to generate useful by-products such as biogas,… Read More

(This article belongs to the Section Chemical Engineering (CHE))

by Muhammad Zia ur Rahman, Saba Waseem, Sidra Riaz, Zainab Riaz, Aneeq Asif, Ayesha Siddiqa and Ali Asghar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 87-92, 2022; DOI: 10.55708/js0104012
Abstract: This paper explains the algorithm for fire alarm for the purpose of safety from any loss and property damage. Here, the designed algorithm is for the comparison of captured pictures. The purpose of comparison is to validate our results. In captured pictures, there may exist fire colour in pictures, which is the indication of fire… Read More

(This article belongs to the Special Issue on Special Issue on Multidisciplinary Sciences and Advanced Technology 2022 and the Section Interdisciplinary Applications – Computer Science (IAC))

by Carlos Esteban Huerta Briones
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 81-86, 2022; DOI: 10.55708/js0104011
Abstract: The article indicated basically showed the autonomous collaborative work of the students and no direct reference was made regarding the work in remote classroom, this time what is presented is a methodology of direct work of the teacher with the students during the teaching sessions, which last 60 minutes in times of pandemic, which allowed… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Yash Patil, Shivraj Patil, Suhas Gawade, Vaishnav Shinde and Samidha Jawade
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 62-67, 2022; DOI: 10.55708/js0104008
Abstract: Belt conveyor system is mostly used in industries for transportation of raw materials and finished products. This paper includes study of detailed design procedure and analysis of flat belt conveyor components for light duty applications. Belt conveyors used for segregation of defective products up to 2 kg maximum load whose conveyor capacity is 2 TPH… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Salita and Khoula Maryam
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 54-61, 2022; DOI: 10.55708/js0104007
Abstract: This paper aims at determining the factors responsible for shaping as well as building political ideas and values. By conducting a survey in a Public University in Pakistan and filling of questionnaires by the respondents, results were obtained. Estimation results showed that Media and education emerged as the domineering factors significantly contributing in the political… Read More

(This article belongs to the Section Economics (ECN))

by Chris Nikolopoulos and Ryan Koralik
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 48-53, 2022; DOI: 10.55708/js0104006
Abstract: Prediction of plant growth and yield is one of the essential tasks that enables growers of food and agricultural products to effectively manage their crops. In this paper, a hybrid evolutionary/fuzzy machine learning approach is introduced where a genetic algorithm is deployed to learn the optimum membership functions of relevant fuzzy sets and a knowledge… Read More

(This article belongs to the Section Artificial Intelligence – Computer Science (AIC))

by Festus Chukwudi Onyeka, Chidobere David Nwa-David and Thompson Edozie Okeke
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 28-37, 2022; DOI: 10.55708/js0104004
Abstract: In this paper, a polynomial displacement function is developed to evaluate the stability of rectangular thick plate that is freely supported at the third edge and other three edges simply supported (SSFS). Employing three-dimensional (3-D) constitutive relations which consist of entire stress components, the functional for total potential energy was obtained. The governing equations plate… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Radoslav Hrischev
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 22-27, 2022; DOI: 10.55708/js0104003
Abstract: This article is a result of the need to quickly and efficiently organize distance learning for students during the pandemic caused by COVID-19. Some e-learning opportunities provided by internet technologies, web-based platforms, online engineering tools are presented. Examples of training students in business information systems based on learning platforms and demo systems are presented, as… Read More

(This article belongs to the Section Education and Educational Research (EER))

by Roberto Mazzolin and Asad Madni
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 09-21, 2022; DOI: 10.55708/js0104002
Abstract: Executive leadership in government, military and industry are faced with many difficult challenges when trying to understand the complex interaction of public and government security policies, the vulnerabilities in the wide array of key technologies supporting critical infrastructure upon which society is vitally dependent, and the identification of key cyber security trends that will need… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Abdulhalim Musa Abubakar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 170-187, 2022; DOI: 10.55708/js0103018
Abstract: This work aims at providing factual details necessary for the utilization of diverse feedstock for anaerobic digestion (AD) to produce biogas using either conventional or non-conventional types of digesters. This is necessary as different substrates had peculiar merits or potentials of biogas production due to their unique characteristics. Selection of right feedstock is usually based… Read More

(This article belongs to the Section Chemical Engineering (CHE))