by Reham Almutairi, Giacomo Berg and Graham Morgan
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 33-40, 2024; DOI: 10.55708/js0306004
Abstract: The increasing popularity and attention in Vehicular Ad-hoc Networks (VANETs) have prompted researchers to develop accurate and realistic simulation tools. Realistic simulation for VANETs is challenging due to the high mobility of vehicles and the need to integrate various communication modalities such as Vehicle-to-Infrastructure (V2I) and Vehicle-to-Vehicle (V2V) interactions. Existing simulators lack the capability to… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Transportation Science & Technology (TST))

by Yasushi Itoh, Takana Kaho and Koji Matsunaga
Journal of Engineering Research and Sciences, Volume 2, Issue 4, Page # 14-21, 2023; DOI: 10.55708/js0204002
Abstract: An advanced load-line analysis software is devised for nonlinear circuit design and simulation of microwave low-distortion, high-efficiency and high-power GaN HEMT amplifiers. A single software package can incorporate DC, small- and large-signal performances of GaN HEMT devices, and then analyze nonlinear performance of amplitude-to-amplitude (AM-AM) and amplitude-to-phase (AM-PM) modulations, and finally evaluate intermodulation distortion (IMD)… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Javier Urquizo, Diover Bonilla, Francisco Rivera and Rommel Chang
Journal of Engineering Research and Sciences, Volume 2, Issue 1, Page # 1-12, 2023; DOI: 10.55708/js0201001
Abstract: This research is about tuning the automatic generator control (AGC) unit within the National Transmission System (NTG) and is intended to provide a set of key insights into problems related to generator control systems oscillations and the possible available solutions. The case study is the Baba Hydroelectric Power Plant in Ecuador. The aim is to… Read More

(This article belongs to the Special Issue on SP2 (Special Issue on Computing, Engineering and Sciences 2022-23) and the Section Electrical Engineering (ELE))

by Avinash Galande, Swanand Pachpore and Ashish Pawar
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 68-73, 2022; DOI: 10.55708/js0104009
Abstract: A deep groove ball bearing is a rotary element designed for supporting a radial as well as axial load, low friction, and widely used due to little noise and vibration which supports high rotational speeds. In this article, the author carried out a structural analysis (using FE Simulation) of a single row deep groove ball… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Sadanand Ramchandrarao Inamdar and Jayashree Irappa Kallibaddi
Journal of Engineering Research and Sciences, Volume 4, Issue 9, Page # 22-29, 2025; DOI: 10.55708/js0409003
Abstract: In order to find the best path in 6G scenario, this paper suggests a directional routing approach for Mobile Ad hoc NETworks (MANETs) that investigates clubbing of updated Tunicate Swarm Algorithm (TSA), an updated intensification technique inspired by biology and Cross Layer Interaction (CLI). To address its previous shortcoming of trapping into local optima, updated… Read More

(This article belongs to the Section Interdisciplinary Applications – Computer Science (IAC))

by Eunbi Lee, Ashton Minjae Kim and Eunsung Jekal
Journal of Engineering Research and Sciences, Volume 4, Issue 3, Page # 1-7, 2025; DOI: 10.55708/js0403001
Abstract: This paper deals with the primary factors and countermeasures to prevent falls in seniors in an aging society. Falls among seniors are emerging as a serious social and economic problem, leading to psychological trauma, physical injuries, long-term disabilities, fatalities, and increased medical costs. Therefore, fall prevention is essential for improving an individual’s quality of life… Read More

(This article belongs to the Section Social Sciences (SCS))

by Mohammed A. AboArab, Vassiliki T. Potsika and Dimitrios I. Fotiadis
Journal of Engineering Research and Sciences, Volume 3, Issue 12, Page # 24-35, 2024; DOI: 10.55708/js0312003
Abstract: Peripheral artery disease (PAD) affects 237 million people globally, leading to significant morbidity and mortality. Traditional diagnostic methods are invasive, costly, and require specialized expertise, emphasizing the need for more accessible, and accurate alternatives. This paper introduces the DECODE cloud platform, an advanced tool that leverages cloud computing, machine learning, and high-performance data visualization to… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Medical Informatics (MDI))

by Saleh Hussein Al-Awami, Emad Awadh Ben Srity and Ali Tahir Abu Raas
Journal of Engineering Research and Sciences, Volume 3, Issue 11, Page # 60-73, 2024; DOI: 10.55708/js0311005
Abstract: Interior gateway protocols (IGPs) have gained popularity in networking technologies due to their capacity to enable standardized and flexible communication among these algorithms. In autonomous systems (AS), network devices communicate with one another via IGPs. This work presents a fresh investigation into the performance of inner gateway protocols in large-scale enterprise topologies. Also, the experiment… Read More

(This article belongs to the Special Issue on SP5 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2024) and the Section Electrical Engineering (ELE))

by Anantharaj Thalaimalai Vanaraj and Reshi Razdan
Journal of Engineering Research and Sciences, Volume 3, Issue 8, Page # 21-27, 2024; DOI: 10.55708/js0308003
Abstract: Functional Verification Sign-Off is the crux of the design verification problem faced by latest Silicon Designs on the Simulation/Stimulus Driven and the Formal Verification Platforms. Formal Verification Convergence is a custom specific criterion depending on the success, failure, exhaustiveness and reachability of the verification goals generated and validated by the Formal Tool. One of the… Read More

(This article belongs to the Section Hardware and Architecture – Computer Science (HAC))

by Nikolaos V. Oikonomou, Dimitrios V. Oikonomou, Eleftherios Stergiou and Dimitrios Liarokapis
Journal of Engineering Research and Sciences, Volume 3, Issue 7, Page # 23-43, 2024; DOI: 10.55708/js0307003
Abstract: Software-defined networking (SDN) represents an innovative approach to network architecture that enhances control, simplifies complexity, and improves operational efficiencies. This study evaluates the performance metrics of SDN frameworks using the Mininet simulator on virtual machines hosted on a Windows platform. The research objectives include assessing system performance across various predefined network topologies, investigating the impact… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Software Engineering – Computer Science (SEC))

by Nikolaos V. Oikonomou and Dimitrios V . Oikonomou
Journal of Engineering Research and Sciences, Volume 3, Issue 6, Page # 18-32, 2024; DOI: 10.55708/js0306003
Abstract: This work explores the role of simulation in computer networks, discussing various network types, communication protocols, and the utilization of network simulators, with a focus on educational settings. We specifically analyze and compare five prominent network simulators: Cisco Packet Tracer, Riverbed Modeler Academic Edition, GNS3, NS-3, and Mininet. These tools are examined in terms of… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Software Engineering – Computer Science (SEC))

by Mirza Hodžić and Naser Prljača
Journal of Engineering Research and Sciences, Volume 3, Issue 3, Page # 19-26, 2024; DOI: 10.55708/js0303003
Abstract: Variants of proportional navigation (PN) are perhaps mostly used guidance laws for tactical homing missiles. PN aims to generate commanding missile lateral acceleration proportional to line of sight (LOS) angular rate, so that missile velocity vector rotates in such a way to assure interception of a target. In order to generate commanding lateral accelerations, the… Read More

(This article belongs to the Special Issue on SP4 (Special Issue on Computing, Engineering and Sciences 2023-24) and the Section Aerospace Engineering (ARO))

by Muhammad Numan, Usama Saadat and Muhammad Usman Farooq
Journal of Engineering Research and Sciences, Volume 3, Issue 2, Page # 1-7, 2024; DOI: 10.55708/js0302001
Abstract: Building Information Modeling (BIM) provides a robust foundation for driving sustainability across architecture, engineering and construction (AEC) practices. This paper presents a systematic review of literature elucidating the confluence of BIM tools and processes with accelerated performance simulations and green building certification systems needed to guide environmentally sensitive design. Integrated Revit-Insight 360 is shown to… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Muhammad Numan
Journal of Engineering Research and Sciences, Volume 3, Issue 1, Page # 20-26, 2024; DOI: 10.55708/js0301004
Abstract: Construction projects involve numerous risks that can impact cost, schedule, quality, safety, and sustainability. Effective risk management is critical for project success. Building Information Modelling (BIM) offers capabilities that can transform risk management across the project lifecycle. This paper provides a systematic review of how BIM can aid core risk management processes including identification, analysis,… Read More

(This article belongs to the Section Civil Engineering (CVE))

by Zainab Jawad Ahmed, Loay Edwar George and Raad Ahmed Hadi
Journal of Engineering Research and Sciences, Volume 1, Issue 9, Page # 8-14, 2022; DOI: 10.55708/js0109002
Abstract: Some problems want to be solved in image compression to make the process workable and more efficient. Much work had been done in the field of lossy image compression based on wavelet and Discrete Cosine Transform (DCT). In this paper, an efficient image compression scheme is proposed, based on a common encoding transform scheme; It… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Interdisciplinary Applications – Computer Science (IAC))

by Pamela Ramsami and Robert Tat Fung Ah King
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 186-197, 2022; DOI: 10.55708/js0105020
Abstract: The increased penetration of renewable energy sources in the distribution system affects the stability and efficiency of the system. To account for the intermittent nature of these sources, distribution network reconfiguration and the integration of custom power devices are important. This paper aims to identify the optimum location of photovoltaic systems and unified power quality… Read More

(This article belongs to the Section Electronic Engineering (EEE))

by Muhammad Aamish Khan
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 145-153, 2022; DOI: 10.55708/js0105015
Abstract: Magnetorheological dampers are dampers filled with magnetorheological fluid, which is controlled by a magnetic field, usually using an electromagnet. Viscosity of MR fluid changes with the application of magnetic field. In this way we can directly change the stiffness and performance of MR damper based on velocity of vehicle and topology of road, thus, providing the… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 102-108, 2022; DOI: 10.55708/js0105011
Abstract: The derivation of the transfer function of the output filter of the electromagnetic compatibility of the inverter, loaded by RL-branch, proposed, which differs by taking into account the presence of resistances in the longitudinal and transverse branches of the L-shaped filter. The form of recording the voltage transfer function of an electrical transformer loaded by… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))

by Maryam Imran Sheik Mamode and Tulsi Pawan Fowdur
Journal of Engineering Research and Sciences, Volume 1, Issue 5, Page # 41-51, 2022; DOI: 10.55708/js0105005
Abstract: 5G is the successor to 4G technology and it has enabled a new level of user experience with much greater speeds and much lower latencies. Scheduling is the method of allocating resources for transmission of data. In this paper, three scheduling algorithms have been investigated, namely Proportional Fair, Round Robin and Best CQI. An uplink… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Telecommunications (TEL))

by Jigneshkumar Patel and Vijay Sood
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 148-160, 2022; DOI: 10.55708/js0104017
Abstract: Cascaded H-bridge multilevel inverters (CHB-MLI) are employed in a variety of medium/high power applications. These inverters are known to inject unwanted harmonics into the grid, which negatively affects the grid and connected loads. CHB-MLI topology can reduce many of these harmonics by producing multiple output voltage levels and improves the fundamental component using a suitable… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))

by Pustovetov Mikhail
Journal of Engineering Research and Sciences, Volume 1, Issue 4, Page # 127-136, 2022; DOI: 10.55708/js0104015
Abstract: The paper deals with proposals for the procedure of selecting the parameters of the sine-wave filter in case of increased voltage frequency (400—600 Hz) on the output of frequency converter, which is an element of power supply system. Author describes in article the structure of the power supply system for an unmanned underwater vehicle, which… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electronic Engineering (EEE))

by Vaishnavi Kohale, Samidha Jawade and Ganesh Kakandikar
Journal of Engineering Research and Sciences, Volume 1, Issue 3, Page # 116-125, 2022; DOI: 10.55708/js0103012
Abstract: Additive manufacturing creates 3-dimensional objects by depositing materials layer by layer. Different applications of additive manufacturing were examined to determine future growth possibilities. The current research seeks to discover existing additive manufacturing techniques based on the process mechanisms, evaluate modelling approaches based on modelling methodologies, and identify required studies. A significant number of numerical simulations… Read More

(This article belongs to the Section Mechanical Engineering (MEE))

by Abinash Rath and Rumpa Saha
Journal of Engineering Research and Sciences, Volume 1, Issue 2, Page # 01-09, 2022; DOI: 10.55708/js0102001
Abstract: Power quality monitoring is one of the most important aspects of designing of compensators and other FACTS devices used in the power system. This paper aims at finding the power quality indices from the voltage and current samples of a harmonic polluted grid, by using a newly proposed sample manipulating technique. Here, all the harmonic… Read More

(This article belongs to the Special Issue on SP1 (Special Issue on Multidisciplinary Sciences and Advanced Technology 2022) and the Section Electrical Engineering (ELE))